Forscan applications
#3821
Member
Thread Starter
.
#3823
Member
Thread Starter
#3824
Senior Member
I can't believe nobody posted back on this one...
It appears correct, for my 2013 XLT at least.
Mine was factory set to 2, changed it to 3.
It now takes a double press to activate the panic.
Single press still cancels it.
Good find because I too have had the occasional pocket activation.
It appears correct, for my 2013 XLT at least.
Mine was factory set to 2, changed it to 3.
It now takes a double press to activate the panic.
Single press still cancels it.
Good find because I too have had the occasional pocket activation.
#3825
Double press to activate the panic, great mod, did mine yesterday along with the bambi mod.
Can we change the number of flashes on momentary turn signal, three flashes is just too little?
Can we change the number of flashes on momentary turn signal, three flashes is just too little?
#3826
Senior Member
The following users liked this post:
Gary Faulkner (01-03-2019)
#3827
Senior Member
I set my turn signal to 5 flashes and it seems just right. It's enough time to bump the turn signal, check the mirror and blind spot, and change lanes. Also, what ever you set it too, it will do 2 more flashes when a trailer w/brakes is connected.
The following users liked this post:
Gary Faulkner (01-03-2019)
#3828
The FORScan Guy
I've completed mapping out the SCCM here: https://docs.google.com/spreadsheets...t#gid=87872224
I'm going to start now on APIM (Sync 1, Sync 1.1, and Sync 2) spreadsheets. If someone who has either the Sync 1 or Sync 1.1 could message me or post your VIN it would help out a lot.
I'm going to start now on APIM (Sync 1, Sync 1.1, and Sync 2) spreadsheets. If someone who has either the Sync 1 or Sync 1.1 could message me or post your VIN it would help out a lot.
#3829
Member
Thread Starter
I've completed mapping out the SCCM here: https://docs.google.com/spreadsheets...t#gid=87872224
I'm going to start now on APIM (Sync 1, Sync 1.1, and Sync 2) spreadsheets. If someone who has either the Sync 1 or Sync 1.1 could message me or post your VIN it would help out a lot.
I'm going to start now on APIM (Sync 1, Sync 1.1, and Sync 2) spreadsheets. If someone who has either the Sync 1 or Sync 1.1 could message me or post your VIN it would help out a lot.
1FTFX1CFXDFA98856
.
The following users liked this post:
Livnitup (01-05-2019)