M0RRIS

I got lucky, the 327 one that people had issues with seemed to work for me.

brantlyj

I might get the usb model. I would only need it to turn on the RS menu. Not sure if it’s worth the $30.
I was given the WiFi by another forum member. I was able to program the BCM just fine. Just not the IPC.

larryo108

iTrader: (1)

I'm hoping that someone can help me out with this. I bought some keys from Amazon and enabled remote start using the information in this post. I bought the antenna as well with the longer connecting cable and have it mounted under the headliner above the passenger side vanity mirror. I left the antenna in the plastic case when I moved it above the headliner. I also just shoved it up there. I did not remove the headliner like the instructions said to, so the plastic bit behind the overhead console was not trimmed.

I am having an odd issue when locking the truck. If I am behind the truck and the courtesy lights are still on after exiting the vehicle, I can not lock with the key fob unless I walk around and hold the key up to the windshield. If I am in front of the truck, it will lock every time regardless of whether the courtesy lights are on or not. From the side it is hit or miss. If the courtesy lights have turned off I can lock the truck from any angle, but I am too impatient to sit and wait for them to turn off.

I have disconnected the remote start antenna to see if that is the cause of the issue and it doesn't fix the problem. I have tried the OEM key to see if that is the issue. The problem persists. Does anyone have any ideas or seen this behavior after adding remote start?

RLXXI

If I leave my dash cam on, I have to be right up next to the truck to make it work. RFI is the cause, makes sure you have no external devices on or plugged in like dash cams, cell phone charger, radar detector etc.....

I like leaving my dash cams on because they also act like a surveillance system recording movement or impact detection so I upgraded to cell phone remote access, with that system I can start my truck from any where on the planet so long as I have a cell signal.
.

larryo108

iTrader: (1)

I figured it may be something like that. My old USB charger was cuasing the TPMS fault light to go off, but I swapped that one out. I have some cigarette lighter USB adapter charger things. One in the front and one in the back. But there are no devices connected to them. Maybe I will try to unplug those and see if I have the same issues. Thanks.

jharpe

Thanks! Just now got around to doing this. I had initially changed that value to get rid of travel link, but it looks like i changed the country code immediately after (not sure what i was thinking on that one). Went back and changed it and i know have nav in motion!

rwblue

Hi folks. I have the OBD Link Bluetooth also, works well. I couldn't find the right combination to get the R. S. menus. I watched a video where the guy took it to the dealer and they added Remote Start plus the menus in the cluster for $15. I guess it depends on the dealer. Hope this helps. I have a short video of what shows up in the cluster if someone wants to see it?

jdunk54nl

From the spreadsheet in my signature.

720-01-02
xxxx xF0x xxxx Basic remote start menus (climate heat/ac, front defrost, timeout, quiet start)
xxxx xF2x xxxx remote start menu + rear defrost
xxxx xFEx xxxx remote start menus +rear defrost and heated/cooled seats

rwblue

Hi jdunk54nl. Apparently, I didn't read your specific spreadsheet. In your post above with these parameters ( xxxx xF2x xxxx remote start menu + rear defrost ) it doesn't have all the menus in the cluster. Not sure why. I posted the picture thinking maybe one of the other x's / numbers in mine might help someone else. Thanks for your spreadsheet info, going to try some of it. Maybe the DRL's

M0RRIS

So if RS is 720-01-02 what does the line 726-19-01 have to do with it?