Forscan applications
#2591
Member
Thread Starter
#2592
BoostKing Tuning
The truth is, with enough research and know-how, you could upgrade some modules to the 15+ and add features you shouldnt have. This has been done in the BMW that I own to add features my modules couldnt handle. I'm not sure in the complexity, and people would have to test for different things but I dont see why it could not be done.
I for one would still like to add the global window. When I have some time I may get around to researching what I can do to add this feature using a newer module, if its possible, which I lean towards thinking it is.
I for one would still like to add the global window. When I have some time I may get around to researching what I can do to add this feature using a newer module, if its possible, which I lean towards thinking it is.
__________________
www.BoostKingTuning.com
2022 F150 Tremor - Current - BoostKing Custom Tuned 440whp on 93. --- 2022 Expedition Stealth H.O. - JB4 Only --- 2018 Mustang Hellion Sleeper - 907 whp on E85
2022 F150 Tremor - Current - BoostKing Custom Tuned 440whp on 93. --- 2022 Expedition Stealth H.O. - JB4 Only --- 2018 Mustang Hellion Sleeper - 907 whp on E85
#2593
Senior Member
The truth is, with enough research and know-how, you could upgrade some modules to the 15+ and add features you shouldnt have. This has been done in the BMW that I own to add features my modules couldnt handle. I'm not sure in the complexity, and people would have to test for different things but I dont see why it could not be done.
I for one would still like to add the global window. When I have some time I may get around to researching what I can do to add this feature using a newer module, if its possible, which I lean towards thinking it is.
I for one would still like to add the global window. When I have some time I may get around to researching what I can do to add this feature using a newer module, if its possible, which I lean towards thinking it is.
#2594
Senior Member
Compared to a BMW these trucks don't really have that many modules. Most of the desirable features are run through the BCM, that's the one I'd look at swapping out. With that said, you'd probably have to repin a lot of connectors just to make the electronic side of things work. Then you'd have to figure out how to mount it into place. Definitely doable, it'd be a cool project for sure.
#2595
Member
Thread Starter
I think it would be easier just to program an arduino or something to open the windows after so many clicks, or if as you hold the unlock button down if those power door wires continue to send power then you could do a time to hold. Throw one of those in each door or a main one with wires running to each door you want the windows to go down on and you should be good. Boot time should be less than a second so tie the main power into something that turns on with the first unlock press.
Yes I know what it is, have one my self to lower landing gear on one of my drones using a sonar sensor.
.
#2596
Senior Member
http://www.instructables.com/id/Hack...o-and-Seeed-C/
I have been tempted to repurpose one of my arduino boards for this. I didn't due to forscan and wanted to see its abilities, but maybe one day I will have extra time to waste on this project.
#2597
Member
Thread Starter
#2598
Patience to install new cluster
It sounds like you are on the right track! Make sure to back up everything (the original asbuilt from both clusters!) Change the options for the donor cluster to match what you had on the original and then adjust for whatever new options you wanted with the donor cluster.
After that all options should match and then you just have to get the speedo programmed by a certified shop.
#2599
Patience to install new cluster
It sounds like you are on the right track! Make sure to back up everything (the original asbuilt from both clusters!) Change the options for the donor cluster to match what you had on the original and then adjust for whatever new options you wanted with the donor cluster.
After that all options should match and then you just have to get the speedo programmed by a certified shop.
#2600
Cluster swaping
Can anyone chime in. I have read several threads where someone has stated they just buy a cluster and install it and everything is ok. When a person is upgrading from a 1" window stx cluster to a 4" window xlt cluster or Ftx, or Lariat, or King cab, ect. they are normally upgraded packages. How can it be possibe that a person would upgrade and everthing is fine. My doner xlt cluster has six (6) out of eight (8) different codes, than my stx cluster, plus axle ratio, and tire size differance.