Forscan applications
#2041
How's she goin' eh?
Not sure if it has been asked in this thread but if so I couldn't find it. Is it possible to change the fixed guidelines on the backup camera so that they turn with the steering wheels?? My neighbor has a 2016 Lariat and his does it. I'd like to find a way to get this on my 2012. My back-up camera display is in the mirror since I dont have the display screen.
You also might need the display screen.
#2042
Senior Member
Not sure if it has been asked in this thread but if so I couldn't find it. Is it possible to change the fixed guidelines on the backup camera so that they turn with the steering wheels?? My neighbor has a 2016 Lariat and his does it. I'd like to find a way to get this on my 2012. My back-up camera display is in the mirror since I dont have the display screen.
I have asked this 2 times as I recall, no one has found a way, in this post or the 15 and greater. My sons 14 Explorer has this and I inquired to Ford sometime ago, they said contact a dealer. I never did.
#2044
Senior Member
#2046
Senior Member
So I just spoke to my son, he said he believes there is an option to either have them show direction of travel or remain straight. I will see him saturday, maybe, and will look at this option and maybe we can figure it out.
Unless someone beats me to it.
The following users liked this post:
one2nine (03-17-2017)
#2047
Senior Member
Active Park Assist and rear camera Directional lines
My son just texted me,he said he read online that these lines are only available on vehicles with active park assist, which his car has. He also said this info was reported as coming from an owners manual.
https://owner.ford.com/how-tos/sync-...a-setting.html
Last edited by digitaltrucker; 03-17-2017 at 10:20 AM.
#2048
How's she goin' eh?
Go look at a focus with it. Should help answer.
#2049
Member
Thread Starter
My wife's 14 Escape has the lines that curve with steering, the 2016 Transit 250 (our road service truck), the lines are static.
.
.
#2050
Is it possible to reset the battery management system with forscan? I'm trying to make changes with forscan but can't because I keep getting a low battery message. Just put in a new battery and let it sit overnight with the doors closed but the voltage didn't change in forscan. New battery is at 12.55 volts so I know it's not bad. Do the doors need to be locked for the system to reset?