Originally Posted by Rnlcomp

We are all experimenting with the program so far, no one that I know has tried anything with a GEM equipped truck, perhaps you could expand upon the research.
.

Originally Posted by discodave

Can anyone refresh my memory on how to renew the extended license? It's been over 2 months and mine is expired. I know it's covered somewhere. I saw your post where you said to just go and generate another one, but will that generate a trial license or really renew the extended license?

Originally Posted by Rnlcomp

Go back to the same link on the forscan.org page to generate a new code using all of your original information.

It will extend it again so you can make program changes.
.

Originally Posted by phrenetik

coded my truck last night. DRLs on to turn signals and eliminated the fast blinking turn signal from my LED lights.

had to code the DRLs twice to get rid of the flashing interior light thing.

also one other thing for anyone new to this thread, go signup for the forum if you think you want to do this so you don't have to wait for your extended license AFTER you get your cable.

this one worked fine for me cause I wanted usb. ignore the reviews it works fine with forscan.

12.99

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Originally Posted by schmidt1894

Can someone post a picture of what exactly i'd change in a 2011 f150... to stop the fast blinking? I put switchbacks in and do not want to put resistors so I saw that phrenetik eliminated the fast blinking turn signal due to LEDs... and was wondering how i'd go about doing that on the forscan application itself? I am going to order a bluetooth dongle....

Originally Posted by Di Trut

Look for the 'Lamp Outage' in the BCM. turn those off to get rid of the fast blinker.