Chad Walker

Yes. Not with the mobile app though. You will need a laptop and a OBD2 diagnostic connector.

CJS F-1

thank you.. I have the lap top and OBD2 connector. Just wondering exactly how to program it to work because there was never a preset factory keyless code because the truck never had keyless entry. Any pics and or steps on how to do this would be awesome. I have a pretty good understanding on how to use the app. Just need a little direction.

Chad Walker

gthrift posted on his spreadsheet how to enable the keypad. The question would be does the new keypad come with a master code?

CJS F-1

No master code. I did this mod to my 2005 XLT, the one thing I had to change was the module behind the back seat. I took the module and keyless door handle off a totaled f150 and had ford program it. That's how they got it to work, the new module had a code but my stock module did not. Now the 2011-2014 has a different set up.. All the functions for everything are in one module on the passenger side kick panel.. Wondering if I need to change that on my buddies 2013 to get this to work??

cbbennin

I added keyless entry a year ago to my 2012 XLT Screw. At the time I didn't know about this program, and had the dealer program it. The code was on the fuse box cover in the passenger side footwell. There are several threads on finding it on here, I can't seem to find them while I'm on my phone. Hope this helps!

paintballdude05

If your truck doesn't come with the keypad, is it still assigned a code that would work with a used/new replacement pad? I found mine in a card that was with the owners manual in the glovebox.

Chad Walker

Pre 2011 MY trucks use a GEM while the newer models went to a BCM that is located at the passenger footwell. So if a keypad is added and enabled in the BCM, is there a factory code on a label down at the passenger kick panel that will work with the keypad? I assume this would be the case since the code would be assigned to the BCM and not the keypad. In IDS the code can be changed but I don't think you can do that with Forscan.

CJS F-1

Thanks guys I will try these tips and see what happens

RLXXI

When you open forscan look for this line under bcm (body control module) change what's in red to match what's in green.





That'll get the key pad working.
.

discodave

You should change your screen name to YODA.