paintballdude05

Somebody beat me to it! I just got DRL's to work in the signal lights and the fog lights. However, when I use the module configuration window I have an error under Daytime Running Lamp and Daytime Running Lamp Type. When I go and edit the error, it just shows me the original settings that I was supposed to have, no biggie.

I'm now trying to get the remote start menu to show up on my gauge cluster. Using the ICM/ IPC Module settings I changed 720-01-02 from my factory 5529 EC0A 20BE to 5521 6FEA 23F9 (FX4, 4x4, e-locker, brake controller) in gthdrift's spreadsheet. I was able to gain the remote start menu with that change however I lost the rear view mirror options menu under Driver Assist.

paintballdude05

It appears as though the middle of the code , in line 720-01-02 of the ICM/ IPC, for example EC0A or 6FEA in the post above, are the ones that control the Remote Start Menu as well as the Rear View Camera under the Drive Assist section of the cluster. I'm trying to decipher this piece right now.

Chad Walker

Enabled my DRLs as foglights. Now I just need some XB fogs or at least LED bulbs.
I need to post my APIM settings so that anyone with a Canadian import can set their Sync to U.S. spec. The only thing I need to do is see if I can get vehicle health report with a software update. I swear mobile apps didn't exist until I changed my APIM settings. Now Pandora works like a charm.

paintballdude05

In the ABS Module, the only feature I have to option of changing without going into the As-Built was Hill Start Aid. It appears as though line 760-01-04 changes when I toggle it on/off.

Hill Start Aid Off = 3937 0400 00E0
Hill Start Aid On = 3937 0600 00E2

I'm not sure if this is an option everybody already has or not, I just figured I'd put it out there.

RLXXI

I use Hoen bulbs as my fogs, they are an exact color match to the oem HID's.

http://www.hoen-usa.com/fog.htm Also if you have the 4.2" screen as your stereo, I can give you a link to sync v4.6 that's still working great in my truck.
.

Chad Walker

I will look into those bulbs. I don't have the 4.2" screen but I thought Sync was the same as long as you don't have MFT with the 8". Technically I have an Advent 8" screen that is compatible with Sync. I downloaded a 4.6 file but haven't tried it out. If you have a good copy that you know that works that would be excellent. The Reddit download link doesn't work anymore.

RLXXI

I saved the reddit file. https://drive.google.com/file/d/0B6g...ew?usp=sharing It's what I used.
.

Chad Walker

Okay, I downloaded and extracted to my flash drive. Is it just the syncmyride folder on the flash or does it also need to include the .LST files? I always get confused on the sync updates.

RLXXI

Unzip the file to a thumb drive but DO NOT unzip any files inside it. You need all of them.
.

Shockwave88

Is this a good one. That has mx As well. Or is it too cheap