Fog light halos
#2
Senior Member
Has anyone done this yet and was this how you did them? I'm looking at the Oracle plasma ones.
http://youtu.be/GIA_5_9WZNU
http://youtu.be/GIA_5_9WZNU
The following users liked this post:
03Scott (08-22-2014)
#3
Much easier to buy the ones with the cheap halo and upgrade it to the plasma style. https://www.f150forum.com/f38/ebay-p...r-fogs-254433/
If I had to do it over, I would skip the HID upgrade to the fogs, the OEM HIDS overpower the 35w hid I installed and its very difficult to tell if the fogs are on. The Halo is wired into my turn signals and looks cool IMO.
If I had to do it over, I would skip the HID upgrade to the fogs, the OEM HIDS overpower the 35w hid I installed and its very difficult to tell if the fogs are on. The Halo is wired into my turn signals and looks cool IMO.
Last edited by lanceb1b; 08-22-2014 at 12:49 PM.
#4
Much easier to buy the ones with the cheap halo and upgrade it to the plasma style. https://www.f150forum.com/f38/ebay-p...r-fogs-254433/
If I had to do it over, I would skip the HID upgrade to the fogs, the OEM HIDS overpower the 35w hid I installed and its very difficult to tell if the fogs are on. The Halo is wired into my turn signals and looks cool IMO.
If I had to do it over, I would skip the HID upgrade to the fogs, the OEM HIDS overpower the 35w hid I installed and its very difficult to tell if the fogs are on. The Halo is wired into my turn signals and looks cool IMO.
#5
I did the ones in my 13 Limited, used the adjusting hardware for the original lights, fit fine.