Flowmaster 40 Series 5.0
#21
Senior Member
The Magnaflow 14" is what I am leaning towards but Im afraid it will be too loud inside without the resonator. A local shop will do a custom stainless catback with the Magnaflow for $750. When I had a 11 Ram Hemi with factory duals I got the 14" and left the resonators on the 2 tailpipes. It sounded good.
#22
The Magnaflow 14" is what I am leaning towards but Im afraid it will be too loud inside without the resonator. A local shop will do a custom stainless catback with the Magnaflow for $750. When I had a 11 Ram Hemi with factory duals I got the 14" and left the resonators on the 2 tailpipes. It sounded good.
The following users liked this post:
speedrich (02-27-2015)
#23
Senior Member
Post a video after you install the resonator. I wonder how much it would quiet it down if you just installed a 18" Magnaflow?
#24
#25
Senior Member
#26
#27
Go Broncos
I have the 18" Magnaflow. The tone is great, not as harsh as Flowmasters, but was a bit too quiet with resonator still on. It sounds great without it, significantly louder but minor drone from 1500-2000 RPM. Not really bothersome. The resonator is the key to managing drone IMO. If I had to do it over again I'd try the 14" Magnaflow and leave the resonator in.
#28
Go Broncos
The Magnaflow 14" is what I am leaning towards but Im afraid it will be too loud inside without the resonator. A local shop will do a custom stainless catback with the Magnaflow for $750. When I had a 11 Ram Hemi with factory duals I got the 14" and left the resonators on the 2 tailpipes. It sounded good.
Also, if you take the resonator out you will have drone.
Last edited by ChampWJ; 02-26-2015 at 02:53 AM.
#29
Senior Member
The price is for a single in dual out system replacing everything from the flange back in stainless steel. With dual stainless tailpipes, tips, and muffler, There are not many exhaust shops around here that do that type of work. I did find another place that's $600, but it is 2 hours away. If anyone from PA, DE, NJ, or MD knows of a good place; let me know. I want my exhaust to exit like this:
Last edited by brihvac; 02-26-2015 at 05:50 AM.
#30
Senior Member
Did you put the resonator back on yet? I'm actually waiting on your sound bite/ report before I have mine done. I'm either gonna do the 14" with resonator, or 18" without. Either is the same price at the muffler shop.