Flow thru console
#112
Part numbers were supplied in post #78 I believe but even if you buy the part you'll see that it has to be clipped in and the dash I have (xlt) doesn't have the holes for the clips in the right position so I'm unsure how it will stay I place. I just left it off unless someone has found a solution to this problem.
The following users liked this post:
nugezilla (04-15-2016)
#115
I'm going to make a thread with my flow through console project, I ordered all my parts just waiting for them to come in maybe sometime next week. I didn't see anyone on here who did it actually make the rear vents work. So that's my goal, already talked to the dealership for the parts to make it work (or should make it work). I'll have pictures and part numbers for everything. Also he's the part # for the filler piece between the console and dash, BL3Z-15046B32-AA. That one is black by the way.
The following users liked this post:
nugezilla (04-15-2016)
#117
Captain Awesome
#119
At my local dollar tree store I was able to buy them individually. Check out my thread. https://www.f150forum.com/f38/raptor...282788/index3/