Anyone taken this off? Are there holes under the logo or is it stuck on? I hate it and want to remove it but don't want to take it off and find a couple alignment holes. Looked around online for replacements to see if they showed the back side but couldn't find any.

 

Im pretty sure its just held on with 2-sided tape. Use dental floss or fishing line to saw the logo off then scrub it with goo-gone to remove the left over tape

 

No holes. I've taken mine off. Use fishing string to take off logo and then use goo off to get the adhesive off.

 

^ x3

Took mine off when I removed the dealer sticker.

 

I took ours off of our 2010 right away.....my only warning is to be prepared for some work getting the rest of the two sided tape off.......that stuff is TOUGH!!!

 

WD-40 works good. Get the badge off then soak the leftover with WD-40. My grandpa taught me that 20 years ago.

 

Awesome! Thanks guys!

 

to hell with dental floss.... use a ball peen hammer... works every time

 

Seriously, a sawzall is WAY MORE EFFECTIVE!