Factory keyless mod with stick on pad
#16
Senior Member
Thread Starter
thanks, I spent 4 hours today filling the gaps and making the surface look even. The first coat of paint was rough and bumpy so I sanded it all down, filled and then got some of the bulldog adhesion promoter, PLASTIC primer this time lol and painted. 3 coats of clear and done! Ill post a pic on the truck tomorrow
#17
Senior Member
Thread Starter
I got the holes out of round so I had to go bigger as well which was my error. I took the key pad out of the one on the truck and marked the openings against the ones I messed up. I was able to use my dremmel to make the squares just about dead on but bigger, leaving a little space when fitting the stick on pad.
#18
I got the holes out of round so I had to go bigger as well which was my error. I took the key pad out of the one on the truck and marked the openings against the ones I messed up. I was able to use my dremmel to make the squares just about dead on but bigger, leaving a little space when fitting the stick on pad.