HaloLifts

With the growing number of F150's with F150Lifts.com Ultimate Kits, Adjustable Coilovers, Spacers, and products...We thought we should start a thread for Pics, Specs and Stories. Everyone likes Pics...so Post away Ladies and Gentlemen!

This is the F150Lifts.com Company truck. Ultimate Kit set at 3" of lift, 305-55-20 Duratracs on factory 20" wheels. Bolts on, fits in the garage, bolts off if you sell your truck. Love It!

http://www.flickr.com/photos/88759046@N08/11741658364/http://www.flickr.com/photos/88759046@N08/11741658364/ by http://www.flickr.com/people/88759046@N08/, on Flickr

http://www.flickr.com/photos/88759046@N08/11741516213/http://www.flickr.com/photos/88759046@N08/11741516213/ by http://www.flickr.com/people/88759046@N08/, on Flickr

http://www.flickr.com/photos/88759046@N08/11077503614/http://www.flickr.com/photos/88759046@N08/11077503614/ by http://www.flickr.com/people/88759046@N08/, on Flickr

With our Ultimate Kit above it comes with our 2" Rear Block, this is designed to get you Level when the front is set at 3" of Lift. Level is deceiving when looking at these trucks. We have set a truck on a level slab of cement and the 2" RB gets you dead level. There has been chatter asking us to produce a 2.5" block for those that want a little rake. That is in the works. www.F150Lifts.com

XLTinSD

2013|XLT|2wd w/Ultimate Kit:

UIN2IT

2" front spacer w/2" rear block.....
going with the Bilstein Coilovers & 2.5" rear block soon, for a little extra lift!
Tires are Duratrac 285-60-20 Wheels are 20x9 +13 offset






BONUS PIC....
A little FLEX! Still not at full flex, but close! Gauges say 13deg incline.

Lord-of-Ford

Sweet trucks XLT & UIN2IT! I am about ground clearance and not big lifts so this kit fits the bill perfectly to allow larger tires. Please provide some more feedback on how the truck rides with the new kit. I plan to buy soon.

XLTinSD

Check out page 6:

https://www.f150forum.com/f38/f150li...review-236038/

JRW28

F150 Lifts Ultimate Kit

mrpositraction

Gosh, I used to think anything less than 6" is a waste of time, but I am digging the 3". Still a reasonable height, you get to fit larger tires and you don't' have to cut the frame.

Good work! I also like keeping my stock wheels (I, unlike most, like the stock rims. I have the appearance package 20's) with a larger tire.

ReefDonkey

Stock rims look better IMO

ThatBlue4x4

F150lifts coilovers, camburg UCAs, autospring add-a-leaf
17x9 +6 offset Raceline Renegades with 285/70r17 Cooper STT

Moody Blue

Front coils set at 3" with 3" rear. 305/55/20 Nitto Trail Grapplers with 0 offset on the wheels