Engine Cover
#261
Senior Member
The following users liked this post:
Koolponycar (04-08-2015)
#263
Senior Member
I have a cover with the heater hoses made up I would sell if anyone is interested. I used high quality parker hose with the gates shrink clamps and the doorman connectors. Only thing is you will need to reuse the orings from your factory connectors to ensure a leak free seal. I used this for about 4 months with no issues. Pm me if interested
The following users liked this post:
tinylvis (08-18-2016)
#264
Senior Member
Repainted and reworked install
Hello fella's, I just reinstalled and painted my coil covers ford red. I also put the engine cover back on and insulated my heater hoses with (HP) Heat Shield Fire Shield Sleeves part # 210046, 1" id x 36" length x 2 of those. Still using the Gates quick connects. I also reinstalled my SilverHorseRacing catch can. Ive had all this stuff off for a while since I went to the dealer for some warranty related issues which seem to be fine at this time so leaving it on from now on. I went from satin black on the coil covers to Ford red, both look great in my opinion. I put some clear gloss over the red. I also ordered and installed the Evaporative hose from the 2013 model up so it is not curved and sticking up like on the 2011-12 models.Its the hose with the green clip in the first pic that connects above the TB. That was fun to do from underneath especially the metal bracket that holds the hose coming up the back side of the engine. Well I'm pleased and have about another 120 bucks in this project but am very satisfied. I also cleaned my TB while I had the Air intake off. And cleaned the top of the intake runners.
The following users liked this post:
MPETE (08-30-2015)
#265
Stock airbox?
Greetings all, Thanks for all the great advice and pics. Has anyone figured out how to do this mod with retaining the stock airbox? Really didn't want to switch mine out if possible.
#266
Senior Member
I took a 3.5" 90* coupler and a 3.5" 45* coupler along with a section of 3.5" tubing and built a setup to give enough clearance.. I'll see if I can find a pic and post it up.
The following users liked this post:
Koolponycar (03-04-2016)
#270
Senior Member
butts182 < engine bay pic's >
.