balberd0229

Is it possible? I believe I could run this setup if I stay with a 33x12.50. But I've talked to a guy with a 2.5" Level up front and 3" block out back. I wanna run:

20x10 Fuel Maverick, -12 Offset, 5" Backspacing.

Considering 295/60 Trail Graps. But if need be I'll run 33x12.50 or 305/55

Any help would be appreciated. I used the search feature. But. No luck.

balberd0229

By the way, guy I been talking to has been running -12 wheels, with a 295/60. Minor trimming to fender well plastic.

DavidSchlot822

You can run that set up, I ran 35X12.50R20s on -12 offset 20x9s but I had to trim very aggressively.

balberd0229

How aggressively are you talking? I had though about 22x9.5 Jesters lol but. 35" tires for a 22 are redic.

DavidSchlot822

I had to trim sheet metal inside the fenders.

eddlestone213

OUCH! id stick with stock offset with a 35x12.5... i have a 2.5 inch level with toyo MTs in a 35x12.5 and i havent had to trim a thing, no rubbing either.. just my $.02

DavidSchlot822

A) you can't see any of the trimming.
B) you gotta pay to play.
C) Op wanted info on NEGATIVE offset wheels and 35s. Plenty of people have run a combo like this, and even more have run negative offsets with 33s on just a level.

lewis26

iTrader: (1)

David,

Do you know if a 33.5(285/60r20) Duratrac would fit better without excessive trimming on the same wheel?

Looking at 20x9 jesters, but I can't decide between +12 or -12 offset.

Just figured you'd have an idea.

eddlestone213

A) I am aware of your 3 valid points
B) I was just informing OP of other variations of something he may want to consider because not everyone wants to trim, especially METAL!
C) I wasn't ******* your truck (or anyone else's for that matter) with negative offset wheels, like i said in my previous post... JUST MY $.02 or my opinion if you dont know what that means...

duckman89

In my mind if you ant cut on it , it ant wide enough to look good or you got a big lift just my 2 cents