hemigod

Right, that is the part I added over the painted sill. The one above it covers the wiring harness, and comes standard. They come with 3M tape underneath. Real easy to install, just shove them up under the weather stripping and push them in and then keep some pressure on them until the glue on the tape sets. I think AVS makes them.

rbailey

If I understand the sill correctly, the black weatherstripping around the door my 2010 Screw has them on all 4 doors.

eptesicus

The piece I am talking about is a black piece of plastic that goes over the painted part of the body that's in front of the plastic protector that says F150 on it on the front doors. This protects the paint from being scratched whilst getting in and out of the vehicle. I'll take a picture when it gets light out.

shortride

iTrader: (1)

Lets see a picture of the jam that has it missing.

BobbyC

iTrader: (1)

I was curious so I checked my truck. I have a '10 Screw and all four door sills in place.

eptesicus

I am not talking about the plastic covers that are over inside the cab that have the wire harnesses running underneath. I'm talking about what is circled in red below. I only have one covering my front passenger door sill, and not on any other doors in the truck. There should be another one on the driver's sill, and from what I gather, there should not be any from the factory on the rear door sills.

Correct?

Abn150

My 2010 SCREW has sill protectors on both front doors, but not on either of the rear doors. I think that's how they are supposed to come.

cdh7917

I found this P/N while researching the door sills. It's for the back doors only, as the front doors are supposed to come with them.

9L3Z-1513208-AA

Canuck5.0

Is this from Ford or off E-Bay? Thanks.

Bob_Mac

I just checked Tasca Parts and that is for right side only so not sure if it will fit both sides but it may. Tasca has them for $18 each.....

This is a Ford part number.