johnAG2011

I know I've seen threads where people have done this but after 40 minutes of searching I give up..

Can somebody point me to one of them? Or advise me on the best way to do this?

NastyFFX4

iTrader: (1)

VHT spray tint. Remove the light. Prep it with alcohol, let it dry. Spray 3 coats, more or less for how dark you want, than wetsand with 2000 grit. Spray 3 coats of clear coat. Wetsand with 2000 grit. Finish with polishing the light. Pick up some RTV so that you can seal it.

NASSTY

^^ That's pretty much how I did it with VHT Nite Shades.

caperJ

I didn't remove the light I used a garbage bag to tape around the area and sprayed with VHT. Too many horror stories about brake light leak so I didn't want to chance it.

johnAG2011

Awesome. Thanks for the quick responses, guys!

Oughta be able to knock it out with y'alls input