Decision on offset
 

I got a 2013 with 2 1/2 in leveling kit with blocks in the back and I'm buying rims and tires this weekend but I can't decide on the offset either I'm going 0 offset or -12 ofset with 33s .does anyone have pics with these offsets so I can see how each stick out so I can make up my mind rims will be 20x10

If you do the -12 you are definitely going to have to do some trimming. I just installed a 2.5" level with 20x9 with +01 on mine with 33" copper stt's and have very slight rubbing in reverse at full lock. I will try to get a picture tomorrow of how much they stick out. i would say about a inch. But 20x10's will probably be a little more.

I have 0 offset with 20x9 rims.


Attachment 281685



Attachment 281686

Thanks guys and I don't mind trimming a little just don't want to be cutting on major body panels .fo you know we're yours rubbed dburd

http://i1308.photobucket.com/albums/...psed7d6f4b.jpg
http://i1308.photobucket.com/albums/...ps21255101.jpg
This is when I had a 2.5"/3" Autospring level and I have 20x9 -12 offset wheels with 35s, I had to trim pretty aggressively for this to clear though.

Dang I really like that I was told 35s won't fit with an offset rim but that looks great

This is -12 on 18x9 with 33x12.50

They'll fit as trust me, but it requires some work. Worth it in my opinion.

Usmc that is exactly how I want mine to stick out but mine being a 10 in wide rim that's what's throwing me off everyone I see has 9s

I'd personally recommend the 9s if your going to stay leveled

I would but the rims I have picked out only come in 10s

Anyone else with pics of truck with either 0 or -12 offset

A -12 rim will stick out the same regardless of how wide it is... I don't think you should have any rub issues with a 33 on it except MAYBE a lil plastic in the inner fender but it'd be back inside the fender well where it could be made to look like a factory cut where you'd never notice but I don't think you're going to have to trim. If you had a -24 10" rim then ya you'd prolly definatley have to trim

Thanks a lot 2008f150 that makes my decision easier

Any more people with these offsets got pics they can post I'd sure like to see more

Did you have to do any trimming at all?