FordOutdoors1

Hey guys, I don't normally post something like this but felt I owed it to the community to share a near disastrous event with Daystar 2" Leveling kit. The bolt extenders snapped off! Several of them! If you look closely at my pics you can see how little metal is holding the threaded bolt to the collar. I would never recommend using these spacers. I know Daystar has a good reputation but mechanics is mechanics and there is NOT enough metal holding this together!

See pics please.

2011 F-150, FX4, Ecoboost

rdkev

HELL BENT STEEL. That is all....

2008f1504x4

I just put my 1" on you have me worried ... Almost seems like they were over tightened on the stock studs and it separated from the stock studs bottoming out... I had to cut mine for the lil 1" and I don't think I tightened mine enough to do that

EverettCD

Post a picture of the cheater bar you used for the install.

Bogie89

iTrader: (1)

Oh no. Got me worried now on what may happen to mine!! Im gonna need to hurry and buy some Fox struts then!

Mitch101

This was another reason I went with Auto Springs, I was not into cutting anything to make it to fit.

Toddman38

iTrader: (5)

Another reason to keep your suspension Stock!

Azuri

Or get better leveling shocks.

BoostEd6

Ouch. What's the plan? Going with another leveling kit?

Butters_33

iTrader: (1)

Ouch, that's brutal. I was thinking about getting a Daystar 1'' leveling kit but now I don't think so. To bad nobody else makes a 1'' kit.