Compass and forscan
#11
Senior Member
Originally Posted by jp360cj
My 2012 doesn't have the compass in the cluster (it's in the basic sync radio display). My cousin has a 2014 that's nearly identical in options to mine, but has the 4" display for the radio. He has the compass in the gauge cluster. I loaded his ICM As Builts into my truck (I think only 1 digit was different) and I still didn't have the compass. Also, folks who have done a cluster swap have gotten the compass, so I'm pretty sure it's in the firmware of the cluster.
My 720-01-01 is FFDE 7035 822D
I went through Forscan and changed one option at a time in the ICM and saved each file. Then compared them with the As Built compare program and deciphered some of the ICM codes. I don't have the results with me, but I posted it in the Forscan thread.
My 720-01-01 is FFDE 7035 822D
I went through Forscan and changed one option at a time in the ICM and saved each file. Then compared them with the As Built compare program and deciphered some of the ICM codes. I don't have the results with me, but I posted it in the Forscan thread.
The following 2 users liked this post by RaptoRx7:
2014 F150 Lariat (03-01-2017),
M0RRIS (03-01-2017)
#14
Thanks again for the help, RaptoRx7, I am very close to unlocking the compass. Right now i have it on my dash but I can't seem to configure it. I drove in circles for a while but it didn't seem to calibrate.
#16
ICM
720-01-01
FF5E 7038 82xx
I changed FF5F to FF9E and it unlocked the compass. However, I still am yet to calibrate it, but will try again tomorrow.
Thanks again, Raptor! I will update the thread as things evolve
#17
Senior Member
As per RaptorRx7's advice, I changed the following:
ICM
720-01-01
FF5E 7038 82xx
I changed FF5F to FF9E and it unlocked the compass. However, I still am yet to calibrate it, but will try again tomorrow.
Thanks again, Raptor! I will update the thread as things evolve
ICM
720-01-01
FF5E 7038 82xx
I changed FF5F to FF9E and it unlocked the compass. However, I still am yet to calibrate it, but will try again tomorrow.
Thanks again, Raptor! I will update the thread as things evolve
#19
#20
On my 2011 Platinum, changing the above values did not enable compass, so it looks like the 11-12 guys will need a cluster firmware update first. I will revert it back now. For what it is worth, it looks like Forscan may be able to flash firmware updates in future versions, so there is always hope lol.