MurderFX

no.

berty

Strictly aesthetics.

Tallyman89

Does the exhaust need to be cut for the tip to fit properly. Not stick out too far?

berty

Oh I'm almost certain, these stock ones the pipe runs all the way through the tip and sticks out just as far.

Wannafbody

Pypes exhaust has a nice selection of tips. On my TransAm, I found that oval tips made the sound deeper and slightly louder but that's a V8.

rtmach1

See attached photos

MurderFX

proximity to the rear mounted muffler on fbodies prolly had something to do with that.

johndog82

iTrader: (3)

slightly off topic, but can someone confirm that the stock 5.0 exhaust pipe on a 2013 truck is 2.75"? Or is it 3"? I'm having a tough time measuring mine because of my slanted chop right at the bend and I can't tell if it's 2.75" or 3".

berty

uh my stock 2012 5.0 is 2.5" until the muffler than 3" from the muffler to the tip.


Also the new tip should be in today, ill try to get er on and get some pictures done before dark!

johndog82

iTrader: (3)

I tried to measure mine the best I could and it seemed like it was either 3" or a tiny bit less. But not 2.5". My "slanted chop" mod is keeping me from quickly and easily measuring it.