Budget puddle light and turn signal install
#1
Senior Member
Thread Starter
Budget puddle light and turn signal install
Well after searching for an affordable set of mirrors with the puddle lights and turn signals I decided to make my own. I ordered the leds for the puddle lights off line for around $15 shipped and the led strips from autozone for $15. Took a little time to get it all installed today along with painting the mirror caps to match the truck. Here is a quick write up how I did it.
First after removing the mirror off the truck I removed the mirror and cap for the puddle lights.
Here are the puddle lights I used.
Next I drilled the cap and mounted the leds for the puddle lights.
Then I removed the four silver screws holding the front mirror cover and removed it then separated the cap. (sorry no pic of that)
I then installed the puddle light and ran the wires following the factory wiring.
I also added the turn signal lights behind the reflectors while I was there and wired them in. The install is similar to what others have done on here so I diddent document that part.
Next after re-installing the mirror I used t taps to hook up the turn signals and lights according to a pinout i found on google.
All finished
I will get a pic of the puddles on when I gets dark enough and post that up.
First after removing the mirror off the truck I removed the mirror and cap for the puddle lights.
Here are the puddle lights I used.
Next I drilled the cap and mounted the leds for the puddle lights.
Then I removed the four silver screws holding the front mirror cover and removed it then separated the cap. (sorry no pic of that)
I then installed the puddle light and ran the wires following the factory wiring.
I also added the turn signal lights behind the reflectors while I was there and wired them in. The install is similar to what others have done on here so I diddent document that part.
Next after re-installing the mirror I used t taps to hook up the turn signals and lights according to a pinout i found on google.
All finished
I will get a pic of the puddles on when I gets dark enough and post that up.
The following users liked this post:
johndog82 (03-28-2015)
#6
Senior Member
Thread Starter
#7
Senior Member
Wayne
Trending Topics
#9
Senior Member
Thread Starter
At the connector for the mirror you will tap into:
Pin 10 for the turn signal power
Pin 11 for the puddle light power
Pin 8 for the ground on both lights
Pin 10 for the turn signal power
Pin 11 for the puddle light power
Pin 8 for the ground on both lights