Big thanks to Moody Blue, post your pics of his work
The following users liked this post:
dzlbudman (02-22-2013)
#494
Palmetto Pride
Just take your time and follow the instructions carefully. The key is lots of the soapy water solution to slide into place and then once squeegeed with your fingers take a little bit of heat to help "mold" them to the emblem. Good luck can't wait to see pics.
#495
ok - so without going through 50 pages in this thread as i have not signed on lately - how do i go about getting a set of emblem overlays done and headed my way? I want charcoal/black with red letters....for my fx4
#497
Member
If it is a large decal with not much detail to it, you should be fine.
#498
Palmetto Pride
If you have small letters or details like I had on mine I would also suggest having a second person help you. I had my neighbor use a pencil razor blade and when some of the small letters or outlines didn't want to come off of the backing, he would pry them loose so they would remove. Tedious process, but easier if you have someone to help.
If it is a large decal with not much detail to it, you should be fine.
The following users liked this post:
Thbaseball9 (01-18-2013)
#500
Senior Member