Best modifications under $50
#61
Props for even taking it on. I got lucky and found one I could buy and dye. Because I'm not ambitious enough to build it myself.
The following 7 users liked this post by CorvetteDreamin:
Aungeliquema (06-24-2023),
jesselfout (01-17-2013),
Jim Riley (12-19-2015),
jpgsr2020 (05-16-2023),
kjt8ro (12-25-2013),
and 2 others liked this post.
#62
Senior Member
i made some towing mudflaps from some tractor trailer flaps i got for 10$ each, cut them to size, added and angle iron to the backside of the rear bumper and have them attached with 3 clevice pins. Easy to remove and didn't have to drill any holes. No more rock flying on the front of my RV or anything i tow on the car hauler. I have about 30$ in it and around 25 minutes.
The following 4 users liked this post by rocco:
a_cmc_2b (09-28-2016),
MyDesiredName (01-06-2021),
Rod Bergren (09-07-2017),
vccomputerguy (02-12-2021)
#63
Confused Member
Originally Posted by pappcam
That console looks homemade so if that's the look you're going for, it worked.
The following 15 users liked this post by TheBlack2011FX4:
Aungeliquema (06-24-2023),
BigRed916420 (08-12-2012),
Bumble Bee (12-31-2019),
frinkbc (03-12-2014),
FX4_2014F150 (09-15-2014),
and 10 others liked this post.
#64
Senior Member
Another cheap mod (<$5) is to put the actuator on the tailgate to lock/unlock the tailgate with the key fob. The part on eBay is only about $5, shipped.
Last edited by sharper4; 08-08-2012 at 04:51 PM.
The following 4 users liked this post by sharper4:
#65
Senior Member
Originally Posted by TheBlack2011FX4
Really...? I couldn't do that if I tried! And personally, I really like it! But seriously, you don't have to be so rude about it.. But I think he did a great job!
The following users liked this post:
kjt8ro (12-25-2013)
The following 9 users liked this post by Surfmonkey:
14stxf150 (12-21-2014),
blessedcajun (03-31-2015),
Gordo96 (04-05-2014),
jpgsr2020 (05-16-2023),
kjt8ro (12-25-2013),
and 4 others liked this post.
#67
SilverBullet
iTrader: (3)
Originally Posted by CorvetteDreamin
+2
Props for even taking it on. I got lucky and found one I could buy and dye. Because I'm not ambitious enough to build it myself.
The following 7 users liked this post by LaBalaDePlata:
DTasch (01-06-2024),
Fordwoman (05-17-2013),
galaxie289 (09-18-2012),
johninwny (10-18-2012),
PeterTheFirst (12-14-2022),
and 2 others liked this post.
#69
Originally Posted by LaBalaDePlata
bought these led light strips at autozone for $20, fuse tap was $5, a roll of 18ga wire was another $5 switch was also $5. $35 for footwell lights not bad!!