sincitizen

Very nice

Brett2013fx4

Looks really good. Can't wait to do mine in red. What leds you use and placement by chance?

Here's mine. Plastidip 6 bucks tape was 5 and 2 sided tape was 4.

DSutherland

Nice job! The LED's I picked up at a Local hardware store. 2x12" strips. I was limited to where I could put them. Drivers side is right on the edge under lip and passenger side is on the soft housing under glove box

Brett2013fx4

Thank you.
I wanna put Em to where you can't see the lights when you open the door in case I have Em on then

tomasulo

Looks really cool!!

johnday in BFE

iTrader: (1)

Looks good. What did you do to switch them?

schizbomb

Is there a wire to tap that makes the LED footwell lights come on only when the headlights are on? I currently have them on a add-a-fuse and I just really wanna clean that up and just tap a wire.

DSutherland

There was no light there before - just added the LED's

Not sure where you could tap into the headlights.... I tapped into the dome lights. They are pretty bright and I wouldn't want them on when Im driving. Tapping into the dome light allows me to turn them on when ever I want, and the dim feature works on them too. I went out last night and the first place I stopped I opened my door and a guy in the parking lot said right away - "holy ****! how'd you get all that blue light in there?"

If you would like to tap into your dome light check out the thread I started asking for help. Everything you need to know is there.
https://www.f150forum.com/f38/footwe...needed-270954/

johnday in BFE

iTrader: (1)

LOL, that's what I meant! I'll take a look at your other thread, I wasn't aware of it. Thanks

Brett2013fx4

Someone was asking about this. I found the pic on my phone lol