Best modifications under $50
#1893
I anticipated a significantly diminished output so I put in Sylvania SilverStar zXe prior to the film. The lighting is still dimmed from stock, but it may be the difference between yellow light and white light.
Running low beams with the fogs and high beams without gets the job done just fine.
#1894
Did the USB2 mod thanks to this thread and loving not having my console clutterd with an iPod
Love the pillar covers that have been posted. Wish I wouldve seen these before I put my window visors on
Love the pillar covers that have been posted. Wish I wouldve seen these before I put my window visors on
#1895
Member
Join Date: Sep 2013
Location: Illinois (south of Chicago)
Posts: 38
Likes: 0
Received 11 Likes
on
6 Posts
1x8 board for $5.00 indoor/outdoor carpet for $3.50 (only because the roll was 12 feet across and they made me buy a 1' by 12' section) Made a 3 sided box with the 1x8 and cut a slight angle on the 2 side pieces to match the angle of the seat bottom then wrapped the whole thing in the carpet and stapled from behind. Installed in the truck and screwed in place using existing holes in seat support frame. I then moved my jack and tools to the bed (bed is covered) and put an insert from an old guncase i had in the bottom.
The following 6 users liked this post by jpedric:
3rdF150 (05-22-2014),
CapnMorgan (12-21-2019),
FX-Madness (01-14-2016),
Fyrguy335 (10-18-2014),
sigma pi (07-06-2014),
and 1 others liked this post.
#1897
SilverBullet
iTrader: (3)
1x8 board for $5.00 indoor/outdoor carpet for $3.50 (only because the roll was 12 feet across and they made me buy a 1' by 12' section) Made a 3 sided box with the 1x8 and cut a slight angle on the 2 side pieces to match the angle of the seat bottom then wrapped the whole thing in the carpet and stapled from behind. Installed in the truck and screwed in place using existing holes in seat support frame. I then moved my jack and tools to the bed (bed is covered) and put an insert from an old guncase i had in the bottom.
#1898
Nice!!!
#1899
1x8 board for $5.00 indoor/outdoor carpet for $3.50 (only because the roll was 12 feet across and they made me buy a 1' by 12' section) Made a 3 sided box with the 1x8 and cut a slight angle on the 2 side pieces to match the angle of the seat bottom then wrapped the whole thing in the carpet and stapled from behind. Installed in the truck and screwed in place using existing holes in seat support frame. I then moved my jack and tools to the bed (bed is covered) and put an insert from an old guncase i had in the bottom.