MatthewR

I don't know if I am the customer that Stage 3 is talking about but I did the Fox 2.0 on top of a McGaughy lift and ended up with this.

Mrocha85

This is what I've been wanting to see. About how much lift you sitting at? Got any pics of yours angles? It's look great.

MatthewR

I'm not sure how much total lift I got but it is a lot. I think it's around 9 inches. From the ground to the fender is 48 1/4 inch.





This is the best picture I have. I will take more if you want.

Mrocha85

Just curious to see your angles. I see the uniball icon UCA so I'm sure that helps.

Snowhite

Yessir! Nice to see a fellow forum member!

Snowhite

What I don't get is how the zone and bds kits allow for 37" tires right off the bat, but the 6.5 mcgaughys doesn't ... Maybe just the knuckle design, but I wanted this kit but I'm not sure which route of coil overs I'm going to go yet.

CLABRO

Damn that is perfect! Makes me wish I did that with mine and then threw on 37s with my 20" BMFs instead of a 6" and 35s. Ugh.

Awesome looking truck haha

one2nine

iTrader: (1)

I'm running at the .75 setting. It's just shy of 3/4" higher than the rear. Running the rcx 4" block in the rear. Going to get a set of +2" deavers and run a 2" block in the rear. Going that route with some better uca's.

Does the mcgauhey lift run a spacer up front?

MatthewR

Just curious to see your angles. I see the uniball icon UCA so I'm sure that helps.[/QUOTE]

It does help a lot but it wasn't easy to make all of this work properly. I am still working on the rear of the truck.

MatthewR

Damn that is perfect! Makes me wish I did that with mine and then threw on 37s with my 20" BMFs instead of a 6" and 35s. Ugh. Awesome looking truck haha[/QUOTE]

Thanks!

I only have 35s on mine right now. I wasn't sure I would be able to clear the 37s.