Topic Sponsor
2009 - 2014 Ford F150 General discussion on 2009 - 2014 Ford F150 truck.
Sponsored by:
Sponsored by:

Auto Spring Leveling kit

Thread Tools
 
Search this Thread
 
Old Mar 20, 2013 | 09:59 PM
  #1  
07nightrain's Avatar
Thread Starter
Member
 
Joined: Feb 2013
Posts: 84
Likes: 12
From: Central Illinois
Default Auto Spring Leveling kit

All you guys and gals running the 2.5 leveling kit with the 3 inch block in the back, does the truck set level or is there a slight rake in the front?
Reply
Old Mar 20, 2013 | 10:39 PM
  #2  
sluggo1's Avatar
Deer Slayer
 
Joined: Mar 2012
Posts: 1,558
Likes: 44
From: Northern Illinois
Default

I have this exact setup. About 1/2" rake still but perfect if I hookup to my small trailer or have light to medium load in back. Had I not swapped out rear blocks I would have been a bit nose high.
Reply
Old Mar 21, 2013 | 06:25 AM
  #3  
topholefun's Avatar
Senior Member
 
Joined: Nov 2011
Posts: 122
Likes: 32
From: Montreal, QC CANADA
Default

Originally Posted by 07nightrain
All you guys and gals running the 2.5 leveling kit with the 3 inch block in the back, does the truck set level or is there a slight rake in the front?
Check out my post #1455

https://www.f150forum.com/f38/tire-w...7/#post1779043

It still has the 'factory' rake... just a little higher.
Reply
Old Mar 21, 2013 | 08:45 AM
  #4  
HoustonRider's Avatar
0.9% is for suckers!
 
Joined: Sep 2012
Posts: 1,529
Likes: 172
From: Texas
Default

Depends on the truck. FX4 has more of a rake.

Measure measure measure.
Reply
Old Mar 21, 2013 | 09:13 AM
  #5  
BurntToast's Avatar
Senior Member
 
Joined: Aug 2012
Posts: 140
Likes: 42
From: Indiana
Default

Just for comparison I have the 2in AS in the front and 3 inch block in the rear and I have exactly 1 inch rake.
Reply
Old Mar 21, 2013 | 09:26 AM
  #6  
krj10's Avatar
Senior Member
 
Joined: Feb 2013
Posts: 127
Likes: 8
From: copiah
Default

I had that setup on my 10 and still had atleast an inch of rake. I wanted it more level than that. My next setup will be dfrnt.
Reply
Old Mar 21, 2013 | 09:30 AM
  #7  
KWJS12's Avatar
Senior Member
iTrader: (1)
 
Joined: Oct 2007
Posts: 260
Likes: 21
From: Milwaukee, WI
Default

2012 FX4 SCAB 1" rake. 40 1/4" from fender lip to ground in front 41 1/4" in the rear with 2 1/2" front spacer 3" rear block.
Reply
Old Mar 21, 2013 | 10:52 AM
  #8  
Hammer40's Avatar
5 Year Member
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2011
Posts: 374
Likes: 65
From: Vashon Island, WA
Default

2010 Lariat. I have a rake. Never measured it though.
Reply




All times are GMT -4. The time now is 04:30 PM.