default_user8

I got the 2.5in autospring with the 3in rear blocks. That put my truck back at the stock stance. Which is NOT what i wanted, I must have misread something somewhere, because i thought it was going to be level. With my stock blocks back in it looks just a tad bit higher in the front. Planing on cutting an inch off the 3 inch blocks and reinstalling them after hunting season.

white08gt

I used the 1.5" AS spacer and got over 2" of lift, on my 2013 Screw 4wd. called AS direct and they will build an AAL that is only 1-1.25" of lift. you can specify when ordering in the remarks is what they told me. looking at my truck today after over a year and the front is still higher than the back which I haven't done any lift. running the Rancho 7000s with Hellwig rear sway bar. 3rd hole on the bar makes it Trans Am Truck! lol would not go above 2" on the spacer, AS didn't recommend 2.5" even though they sell them.

zbayer

This. I wouldn't suggest going 2.5" especially being a 4x4.

Cws752

I put 2 inch and the AAL on my 2011 Lariat 4x4 and it is great.

Fordzilla150

I agree the 2" with add a leaf is what I'm running. Still has a little rake to it. I've got a 6.5' bed and 275/65/20's.

dropit_dragit

Hopefully my 2.5" will be here in a couple days. I have an FX4 and have the 1.5" block in the rear already. So hopefully this will be enough

default_user8

If you want it level 2.5 inches in the front and the stock rear block will work.

Black_platinum

Just ordered my 2.5" auto spring up front an 3" rear blocks ! Can't wait for them to get in will be putting on 35x12.50/r20 Micky Thompson atz's soon after

bluefox_gt

ive got te autospring 2" with aal. Love it, if you tow anything at all you will not be setting nose high so bad, thats the reason I went with the aal. My truck sets almost 1.5 higher in the rear

Alamo_Jake

Great looking truck!