tmajor

All in all, sounds good. Glad that did the trick.

Motor City

I just tried having my 13 Reg Cab STX data changed for both Auto Lamps & Key pad Entry. I had no luck. The dealer couldn't get the IDS to accept the correct data for the Key Pad. And they Auto lamps did not function properly. The park lamps would go on and the headlamps would only go on, whe put in gear.

hal caison

Motor City, get in touch with tmajor. He has a STX reg cab 4x4 with those features operational.

Motor City

Tmajor helped, His is a 2012 3.7L & mine is a 2013, with a 5.0L. I had them do the following.


726 01 01: FF9E 3034 81AC, 726 09 01: 100 38 , 726 10 01: 0 14 52, 726 11 01: 1 0 40, 726 12 01: 0 000F 4D

tmajor

Is, 726 01 01: FF9E 3034 81AC, a typo? If those are the correct code numbers, that should be for 720 01 01 (ICM) not 726 (BCM).

tmajor

I have found, that 5.0L XL's are easier to find on cars.com, then 5.0L XLT's. Some of the XLs have A/L.

Motor City

Yes, it was a typo. I re looked at my sheet I gave the dealer. I made a mistake on the key pad. I put for 726 15 01: 1 010 46 instead of 1 101 46.

But for the auto lamps I thought I had everything right. So I beginning to wonder if the dealer did something wrong. They said the could not put letters in after numbers?

tmajor

That's not so ... different dealer?

Motor City

I was thinking of trying another. I went and found another XL similar to my STX, wheelbase wise. And all the numbers seem correct. tmajor, if I recall on a pm from you, line 720 01 01, could be left as built and or change, you said. I think you said this line is for the delay menu.

tmajor

That's correct. I think, things should work without changing 720 01 01 ... only because, the delay can be set manually, without changing 720 01 01. ??