tko_818

iTrader: (1)

Whats the best way to clean the inner side of the lens bfore reassembling them? I have a dirty set that needs a thorough cleaning.. im hoping to get a crystal clear lens before I out together these beauties..

HCFX2013

Invisible glass and a microfiber worked well for me without leaving any scratches. There has been a few times where water has gotten into my housing and left water spots on the inside of the lens, and I wiped it away easily and I can't see any scratches. Just be very careful is all.

JLonsinger2011

Be reeeeeal careful, I was dumb and used a paper towel, had to throw that lens out!

NASSTY

I opened the lenses on my 06. It's real easy to not see smudges until they are sealed back up.

13_SCREW

Don't use Windex!

tko_818

iTrader: (1)

[MENTION=70244]tuxedoblack11[/MENTION] [MENTION=92859]yuke175[/MENTION] Any input fellas?

Thanks for the responses! im going to experiment on a spare set of lights

tko_818

iTrader: (1)

seriously man. my lenses looked good on the set on the truck, but at night when the lights are on they look sooo filthy

Yuke's Retrofits

compressed air! blow off the debris. If it needs washing still blow it off with compressed air to get all the debris that might scratch it off and then very gently use a microfiber and invisible glass.