Ambient lighting, raptor third brake light, bed lights installed
The following users liked this post:
txcountry903 (02-24-2013)
08-27-2012, 07:23 AM
#14
Originally Posted by 09xltd
It's plug n play of you don't want the 3 led running lights, but that pretty much is the only reason I got this light. Harness plugs in and then I ran the extra wire to my parking lights..
08-27-2012, 08:23 AM
#16
I know you say its a ford OEM part but if F150s didnt come with an available ambient lighting feature, how is it controlled, how does it install? Is there a separate switch? And more info about how you installed the leds under the bed rails. It seems like it offers alot of light in the bed. Where did you dun the wires?
08-27-2012, 09:22 AM
#17
Well the ambient light kit comes with a control n switch button, the button works through the controller to set the different available light colors. I ran to each footwell (2x) front wells. It also comes with two small led for cup holders, I didn't like the way it looked so I ran them to the rear footwells so each one is lit (4). Ran under carpet hiding the wires and controller in the center console front so it's never seen, then ran to any power source.
The bed lights were simple came with switch and positive negative wires, I installe under bed rails with 3m tape that is provided. Then ran the wires by extending them under the truck to the battery. I put the liners into a small hose the length of the truck incase I'm offloading, sand, snow, ect doesn't effect anything and thats it
The bed lights were simple came with switch and positive negative wires, I installe under bed rails with 3m tape that is provided. Then ran the wires by extending them under the truck to the battery. I put the liners into a small hose the length of the truck incase I'm offloading, sand, snow, ect doesn't effect anything and thats it
08-27-2012, 09:23 AM
#18
Originally Posted by Luch
I know you say its a ford OEM part but if F150s didnt come with an available ambient lighting feature, how is it controlled, how does it install? Is there a separate switch? And more info about how you installed the leds under the bed rails. It seems like it offers alot of light in the bed. Where did you dun the wires?
08-27-2012, 09:37 AM
#19
Proud XL owner
Originally Posted by 09xltd
It's plug n play of you don't want the 3 led running lights, but that pretty much is the only reason I got this light. Harness plugs in and then I ran the extra wire to my parking lights..
08-27-2012, 09:42 AM
#20
For me it was simple becasue i have the roof cab lights, so i ran it to them under the headliner took literally 1 minute. But if you keep going and run it down the left pillar comes right off with a pull and tie it in there simple simple simple