Alignment "Kit"
#32
none.
Join Date: May 2007
Location: West Palm Beach, FL
Posts: 3,840
Likes: 0
Received 97 Likes
on
78 Posts
Update:
I took my truck in for the second time this week for a proper alignment but they could not do the job correctly. Steering wheel is not centered and the camber is still off. They did not have a come along in the shop which I told them would help them do the alignment. They still tried to sell me the camber bolt kit...
I have asked for my money back. Can somebody recommend a shop in north Houston that can align an F150?
BTHOSC!
I took my truck in for the second time this week for a proper alignment but they could not do the job correctly. Steering wheel is not centered and the camber is still off. They did not have a come along in the shop which I told them would help them do the alignment. They still tried to sell me the camber bolt kit...
I have asked for my money back. Can somebody recommend a shop in north Houston that can align an F150?
BTHOSC!
So, i put "houston, tx alignment shop lifted f150" into a little thing called Google, NYSE: GOOGL $580.32 -2.68(-.46%) and it said that
Swalignment.com is, as they say in the 'hood, "Whats up".
#33
For reference
Amazon.com: Moog K100025 Alignment Caster/Camber Kit: Automotive
Amazon.com: Moog K100070 Alignment Caster/Camber Kit: Automotive
not sure how much difference there is between the moog and SPC but this is here too
Amazon.com: Specialty Products Company 86250 Alignment Camber Kit: Automotive
Amazon.com: Moog K100025 Alignment Caster/Camber Kit: Automotive
Amazon.com: Moog K100070 Alignment Caster/Camber Kit: Automotive
not sure how much difference there is between the moog and SPC but this is here too
Amazon.com: Specialty Products Company 86250 Alignment Camber Kit: Automotive
SPC's are made in CHINA, or at least that's what is says on the Amazon page. Not sure on the Moog.
I'd also like to know which kit to use for a stock suspension? The +/- 1 or the +/- 1.5? Mine has been leveled, but that's all. No lift, etc.
Last edited by stankyjeans; 02-09-2021 at 08:48 PM.
#34
Identifying as a Member
The SPC performance cam bolts will work on your front factory LCAs. I'm running them with a 6" lift and uniball UCAs, and factory LCAs, pretty sure I'm running the 86252 part... Which ones are you lookin at? Most local alignment shops can get these in a day or so and do it for you for $100-$150 or you can save all that and do it yourself.
Last edited by tmitchell009; 02-10-2021 at 05:14 AM.
#35
This is the kit I used when I installed my 2" RC Level Kit. My truck wouldn't hold the alignment after my level kit was installed. This is made by SPC. It seems the only difference is there is a pin on the back, that locks it into the frame. After this was installed, I've had no problems. It's an easy install, I just don't have a garage and I hate working in my driveway, and it's cold outside...LOL
SPC 86252
SPC 86252
#36
Senior Member
I use SPC UCA's and they were made in the USA. Chief Niwot and the Arapaho people may want a few words with you! KM