Adding a leveling kit to a lift kit?
#1
Adding a leveling kit to a lift kit?
New to f150 forum. I have a 2013 Ford F-150 lariat crewman 4x4 with the 5.0. It already has a 6” rough country suspension system with the lifted struts. Not the 6” blocks. I’m wanting to add a 1.5” leveling kit on top of the strut. Has anyone done this? What problems came along with this? Can i keep my factory UCAS!
#2
Senior Member
It has no blocks for a 6" lift?
#4
Senior Member
Your biggest issue is that the Rough Country lift uses a knuckle for a 4"/6" lift (most do it this way. So basically a 6" lift is kind of like a leveling kit added to a 4" kit (not quite as extreme as most knuckles are around 5" height adjustment). So if you add more on top of this, you are getting into the same issues as adding a level.
I did look up the parts for rough country and the knuckle is shared amongst their lifts. Give them a call and verify their knuckle is 5" adjustment. If so you could add 1" to 1.5" and be at about the same as a 2-2.5" leveling kit. If it is a 4" adjustment, than they are already using the 6" lift like a leveling kit on top of a 4" lift.
I did look up the parts for rough country and the knuckle is shared amongst their lifts. Give them a call and verify their knuckle is 5" adjustment. If so you could add 1" to 1.5" and be at about the same as a 2-2.5" leveling kit. If it is a 4" adjustment, than they are already using the 6" lift like a leveling kit on top of a 4" lift.
The following users liked this post:
Tclemmer15 (01-14-2019)
#5
Spoke to a RC rep. He said the knuckle is 5”. So i have the 6” lifted strut and wanna add a 1”-1.5” leveling kit to that. Do you think it would be possible and still use the factory UCAS?
#6
Senior Member
Note: I would not personally do this but it is your truck and stage 3 does sell a kit similar to your plan
https://www.stage3motorsports.com/ZO...-Lift-Kit.html