Adding Automatic Headlamps?
#61
So I have a 2012 STX and bought the parts and obviously it didn't work the way I wanted it too -- it's always on in daylight. If I take those two little lines to the dealer and say, "make the change"... what is the likelihood they will? I'm a programmer by trade so when I see those lines above I start to think that "Oh great, here's a guy who wants to change some VERY SPECIFIC memory locations in the body control module that could screw up his entire truck... think I'll pass." (Playing devil's advocate.)
How did you determine that THIS was the change?
I'm not knocking it at all... if this works this is an incredible piece of detective work and many kudos coming your way.
How did you determine that THIS was the change?
I'm not knocking it at all... if this works this is an incredible piece of detective work and many kudos coming your way.
To confirm, I did the same review of 2013 XLT VINs and discovered as did Golfen that these two lines were consistent for F150s with auto headlights. I took a printout of my STX's "As Built" data to my dealer and asked them to have a tech reprogram those two lines. They took it in no problem, charged an hour labor but said if it didn't work they wouldn't charge me. Worked like a charm. All these codes do is "switch on" the function for the light sensor in the BCM.
Reading above, some guys have now figured out how to set these up on 2014's as well, adding a light sensor wiring harness, plus a wire fom the auto-headlight light switch. Very cool!
The following users liked this post:
CorvetteDreamin (09-25-2014)
#62
You should read this entire thread to understand what was done to discover how this series of changes was identified. RE: those specific BCM codes, Read Golfen's posts, these were the BCM code changes he had done by his Ford dealer using IDS. Those specific code changes were identified based upon a review of like-year XLT VIN "As Built" specs, taken from motorcraftservice.com.
To confirm, I did the same review of 2013 XLT VINs and discovered as did Golfen that these two lines were consistent for F150s with auto headlights. I took a printout of my STX's "As Built" data to my dealer and asked them to have a tech reprogram those two lines. They took it in no problem, charged an hour labor but said if it didn't work they wouldn't charge me. Worked like a charm. All these codes do is "switch on" the function for the light sensor in the BCM.
Reading above, some guys have now figured out how to set these up on 2014's as well, adding a light sensor wiring harness, plus a wire fom the auto-headlight light switch. Very cool!
To confirm, I did the same review of 2013 XLT VINs and discovered as did Golfen that these two lines were consistent for F150s with auto headlights. I took a printout of my STX's "As Built" data to my dealer and asked them to have a tech reprogram those two lines. They took it in no problem, charged an hour labor but said if it didn't work they wouldn't charge me. Worked like a charm. All these codes do is "switch on" the function for the light sensor in the BCM.
Reading above, some guys have now figured out how to set these up on 2014's as well, adding a light sensor wiring harness, plus a wire fom the auto-headlight light switch. Very cool!
Thank you (and Golfen) again! Really brilliant work here. Reading the other thread on this.... seems like tmajor was the one who did 90% of the work on this. Kudos to all who played a role here.
Last edited by CorvetteDreamin; 09-25-2014 at 01:40 PM.
#63
Senior Member
Changed the two lines of code and the auto lights work and I was able to program the delay off time.
Last edited by losttime; 12-01-2015 at 08:27 AM. Reason: fixed problem
#64
Has anyone had success with adding auto headlights to a 2014 f150 stx. Mine doesn't have auto lights, nor the sensor... Nor the wiring harness to it. I went ahead and purchased the switch, the sensor, and wiring harness. But before I attempt to install... I was curious if anyone had luck
#65
Is it Friday Yet?
iTrader: (1)
Has anyone had success with adding auto headlights to a 2014 f150 stx. Mine doesn't have auto lights, nor the sensor... Nor the wiring harness to it. I went ahead and purchased the switch, the sensor, and wiring harness. But before I attempt to install... I was curious if anyone had luck
https://www.f150forum.com/f38/how-ad...keypad-303001/
https://www.f150forum.com/f38/auto-h...ht-mod-123905/
The following 2 users liked this post by soaringfalcon:
Dakota Buroker (03-14-2018),
nreynolds (12-04-2023)