6 inch rough country lift with stock 20" rims 2013 fx4
#1
6 inch rough country lift with stock 20" rims 2013 fx4
I just ordered my 6 inch rough country lift and am going to run 35/12.50/r20 toyo open country mt. I am looking to run my stock rim but I need 3-5" of back spacing. I was wondering if there is anyway i am able to do this without using wheel spacers. My fx4 has the appearance group package so they are the black 20" rims. Thanks for all your anticipated help! Any suggestions are helpful.
#2
Senior Member
unless your lift kit comes with new control arms that are longer (while still maintaining the proper mount point for the lower portion of the strut), you're not going to change the centerline of the stance of your truck - which will mean some rubbing from the tires. That's just how it goes w/ the factory wheels.
Thats one reason you typically see aftermarket wheels on trucks with larger than stock tires. Like them or not, you need them for proper spacing unless you use wheel spacers.
If only someone would make a very very very plain 6 spoke wheel in brushed aluminum or a gunmetal gray color (basically the current FX wheels) but have them with a slight offset for wider tires... then I would get them and put on 295's instead of the stock 275 width ... but for now, i'll just keep running the 275s and keep my beautiful factory wheels.
Thats one reason you typically see aftermarket wheels on trucks with larger than stock tires. Like them or not, you need them for proper spacing unless you use wheel spacers.
If only someone would make a very very very plain 6 spoke wheel in brushed aluminum or a gunmetal gray color (basically the current FX wheels) but have them with a slight offset for wider tires... then I would get them and put on 295's instead of the stock 275 width ... but for now, i'll just keep running the 275s and keep my beautiful factory wheels.
#3
I just ordered my 6 inch rough country lift and am going to run 35/12.50/r20 toyo open country mt. I am looking to run my stock rim but I need 3-5" of back spacing. I was wondering if there is anyway i am able to do this without using wheel spacers. My fx4 has the appearance group package so they are the black 20" rims. Thanks for all your anticipated help! Any suggestions are helpful.
The following users liked this post:
GotHonks? (05-10-2014)
#4