Topic Sponsor
2009 - 2014 Ford F150 General discussion on 2009 - 2014 Ford F150 truck.
Sponsored by:
Sponsored by:

5.0 oil consumption?

Thread Tools
 
Search this Thread
 
Old 01-03-2015, 04:17 PM
  #1  
Fast Driver Slow Truck
Thread Starter
 
BlackHD06's Avatar
 
Join Date: Jun 2011
Location: Houston
Posts: 594
Received 91 Likes on 63 Posts

Default 5.0 oil consumption?

How much oil usage is normal for a new 5.0?
3300 miles and it's below the add line. Was right at full at 5, 150 and just below full at 800 miles.

I'm not going to deal w another motor that uses a quart per 1k miles like my gm 5.3.
Old 01-03-2015, 04:35 PM
  #2  
Senior Member
 
ns_redneck's Avatar
 
Join Date: Apr 2011
Location: mississagua on canada
Posts: 3,187
Received 398 Likes on 344 Posts

Default

Mine doesn't use any. Might want to get it checked out.
Old 01-03-2015, 04:39 PM
  #3  
Junior Member
 
13STX's Avatar
 
Join Date: Jun 2013
Posts: 26
Likes: 0
Received 3 Likes on 2 Posts

Default

I've heard of this occurring during break in, and usage declining as you put miles on the truck. So it might be "normal". How many miles are on your engine?
Old 01-03-2015, 04:42 PM
  #4  
Senior Member
 
Z7What's Avatar
 
Join Date: Apr 2013
Location: New Orleans, LA
Posts: 6,130
Received 871 Likes on 695 Posts

Default

People say it's normal but I haven't noticed mine using any at all.

I also don't have the black carbon build up on tip like others either. Have had the resonator deleted for 20K miles and tuned for 25K and never had black soot on my tip.

About 2K miles ago I reinstalled the resonator and replaced the OEM muffler with a Banks Monster Muffler and still no black soot.

Wayne
Old 01-03-2015, 04:55 PM
  #5  
Senior Member
 
white08gt's Avatar
 
Join Date: May 2013
Location: Collierville, Tn
Posts: 1,356
Received 165 Likes on 126 Posts

Default

start by putting in 1/2 qt. and see where it shows up on the dipstick. next put the other 1/2 in. just make sure you are on level ground. when i change my oil myself, have since new putting 7.5 qts my oil level is dead in the middle of safe. i know it takes 7.7 qts, a couple of ounces is not going to make a difference. just change your oil to what Ford suggests 5-20w blend, rings may not have seated good. some suggest to wait to 10k miles before switching full synthetic. this is what i did, other say it doesn't matter. I quess I am just old school.
Old 01-03-2015, 05:15 PM
  #6  
Fast Driver Slow Truck
Thread Starter
 
BlackHD06's Avatar
 
Join Date: Jun 2011
Location: Houston
Posts: 594
Received 91 Likes on 63 Posts

Default

I may just change it and put in exactly 7.7 and mark the stick to true full. Start there and see what happens. Hard to base line not knowing how much exactly was there to start.

No soot on tip here either. 100% stock. I have a bunch of things to do to it but want to make sure there aren't any problems before I start voiding warranties.
The following users liked this post:
Wanted33 (01-03-2015)
Old 01-03-2015, 06:22 PM
  #7  
Five-0 Ret.
 
Wanted33's Avatar
 
Join Date: Mar 2011
Location: Down South in Dixie
Posts: 5,726
Received 674 Likes on 578 Posts

Default

I own two 5.0's, and both have been spot on at every check. I wouldn't worry to much. Good idea to change the oil, and keep a check. Hopefully it will stop. Good luck.

I was gonna say make sure the truck is level when you check. But I've been in Texas, and everything is flat in Texas. Oh, 'cept a few nice looking Cowgirls I saw.

Last edited by Wanted33; 01-03-2015 at 06:26 PM.
Old 01-03-2015, 06:24 PM
  #8  
Super Moderator

iTrader: (1)
 
djfllmn's Avatar
 
Join Date: Jun 2012
Location: PA
Posts: 21,307
Received 4,135 Likes on 2,836 Posts

Default

mine used 1qt in the first 1k

1/2 qt in the second 1k

its breaking in is all

every time ive checked it since then its been spot on
Old 01-03-2015, 06:47 PM
  #9  
Senior Member
 
Wiggum's Avatar
 
Join Date: Mar 2014
Location: Louisiana
Posts: 1,813
Received 482 Likes on 354 Posts

Default

practically speaking, I haven't lost a drop from day one. I have almost 10K miles on my truck in about 9 months, and oil levels are holding perfectly. I changed the oil first time at about 2500 miles, switched to Mobil 1 full syn + Mobil 1 filter, and am about to change it again.

If you are losing oil, it's either due to a slow leak or your engine is burning it - neither of which is good. Get the truck checked out to see which is happening.
Old 01-03-2015, 06:51 PM
  #10  
Member
 
Kansas Mike's Avatar
 
Join Date: Jun 2014
Location: Kansas
Posts: 56
Likes: 0
Received 7 Likes on 4 Posts

Default

2014 5.0. No oil consumption for me. 6000 miles. I check it frequently since several people on the forum shared issues, but mine is perfect so far.


Quick Reply: 5.0 oil consumption?



All times are GMT -4. The time now is 03:03 AM.