BNA150XTR

Hey guys, first off, glad to be a part of this forum. The wealth of knowledge and know how on here is tremendous.

Now i know the "will it fit" topic is something that has been discussed many a time, as it was one that helped me ultimately decide to go with my current 275/70/18 KO2s and 2" AutoSpring Level.

I just bought a set of 100 mile 2017 Platinum 20's (been looking for a while, these fell into my lap by some act of God) for $500. I am ultimately wanting to run some 35x12.50 KO2s on them, but am unsure if ill have to bump up to a 2.5" level or not. It seems most people on here have a 2.5" with 35s, but Im just curious if anyone knows if it can be done with a 2". My truck is 2014 XLT Screw, 4WD.

Even though i know we all know what wheels im talking about, i have posted a few pics of them because I cant help but keep looking at them.

I appreciate your help in advance.

NASSTY

The 2" level should give you enough height. The 35" KO2's measure out to 34.5".
Because of the wider tires you might get a slight rub on the UCA's when turned to full lock. If so...just don't turn to full lock too often.

BNA150XTR

Thanks for the reply Nassty, seen you help out others many times on this forum, hopefully it works out and ill get some pics up when it happens

NASSTY

That should look great with the Platinum rims. Can't wait to see pics.

smgfx4

You'll definitely rub your UCA's.

I know a guy who runs 35x12.5 with some 1/4 wheel spacers, and that helped a lot. I think he got them from rough country's website

cutigers08

iTrader: (1)

Get 1.25" spacers and trim the air damn a little. 2" autospring level on 35x12.50s

twhall9396

Can you fit a 35/12.5 on a factory rim? I'm wondering because I've got an extra tire I wanna use as spare and don't have luck finding a single raptor wheel or aftermarket without spending a small fortune

BNA150XTR

It would really depend on the wheel as far as I know. I've seen it on all wheels except the 11th gen 17 inch wheels, too narrow I think. Im pretty positive the raptors come with 34s or 35s from factory, dont quote me on that though.

twhall9396

Yea the raptors are a 315/70/17 and the wheel is I believe 8.5 wide I've got 17x9 w the 315/70/17. I thought most standard wheels were about 7.5 or so wide I'm not sure

BNA150XTR

Thats a good looking truck man. Is 1.25" the minimum size you think is needed? Id like to be as small as possible with spacers if theyre absolutely necessary.