35 12.50 20 grabbers on fx4 20's
So I'm weeks away from biting the bullet on a leveling kit (already have a set of 35 12.50 20 grabbers with some tread left to make sure fitment is a-ok on the factory 20's). Anyone have any suggestions, input, criticism, or encouraging words?
|
grabbers are a heavy tire...I like the look though
|
http://i94.photobucket.com/albums/l1...pse9f6a195.jpg
35x12.5x20 trail grapplers. They fit and look amazing but they needed some trimming and also some wheel spacers. the 12.5 width without spacers made the tire rub the upper control arm. BTW thats on a 2" HBS leveling kit. |
1 Attachment(s)
33 12.50 20 I find it weird you had to put the wheel spacer in ? the bigger the tire the farther it should be from the upper control arm one would think.
|
1 Attachment(s)
I have 34 in terra grapplers with icon coil overs I did not even have to rim anything. I was afraid they would rub with stock 20's but im all good!!!
|
Originally Posted by dielectric fx4
(Post 2963794)
I have 34 in terra grapplers with icon coil overs I did not even have to rim anything. I was afraid they would rub with stock 20's but im all good!!!
|
Pics or you don't have them :)
|
Originally Posted by TexasTexas95
(Post 2963990)
Pics or you don't have them :)
|
Originally Posted by sean453
(Post 2963712)
33 12.50 20 I find it weird you had to put the wheel spacer in ? the bigger the tire the farther it should be from the upper control arm one would think.
|
Wheel offset plays a huge factor in whether they will fit or not with trimming / spacers
|
All times are GMT -4. The time now is 06:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands