FLiPinoy916

so I've been fortunate enough to get a few things complete, and here are the pics. Just got my parts from Tasca and started the process. Looking to get the wiring done within the next week.

Side markers










Wheel Well Aprons

FLiPinoy916

Turn Signal Marker

DerekL

Starbucks is always good for a project, but really what bulbs are in the puddles?

Black_Thunder

you spelled beer wrong

RES4CUE

Looks good!

archer23

I would really like to add the puddle lights, just a nice touch. Looking forward to the wiring part of the project. That's the part I am completely unaware of how to do.

Brett2013fx4

I really like the side marker/front facing turn signals you added

FLiPinoy916

I received some DM's and will answer any as I go along. Someone asked where I got the parts from

Puddle lamps
http://www.tascaparts.com/

Part Number - 3F1Z-13B375-AA

Part Name - LAMP ASSY

Bulbs
http://www.ebay.com/itm/251830793091?_trksid=p2050601.m570.l4467&_trkparms=gh1g%3DI251830793091.N19.S2.M-13304.R4.TR5
2X White 31MM Festoon Samsung Ceramic Dome Map Interior LED Light Bulb DE3175

FLiPinoy916

I used a low voltage tester to poke into the wires of the mirror after taking it apart. I then used my key fob to unlock my doors. With this pocked into the wire, the bulb lights up and next I lock the door, which causes the bulb to dim down just like our dome light. I continued to each wire until I found the correct wire, tapping into it afterwards.

FLiPinoy916

Pictures of the wire complete and ran along side of the power wire, keeping things clean and tight.