295/65/R20 or 35x12.50R20 on a 2.5" leveling kit
#1
295/65/R20 or 35x12.50R20 on a 2.5" leveling kit
Hi guys I have a 2013 FX4 with a 2.5" leveling kit in the front and 3" blocks in the back that I would like to do a 6" lift on but I would like to split the cost of tires and the lift up by doing tires first then the lift shortly after so anyways could I run ether 295/65R20's or 35x12.50R20's on my leveling kit til I get my lift I have 20" KMC rims with what I believe is 15mm offset their website says they come in 15mm or 35mm offset but the dealer put the rims on so I don't know for sure but they don't really stick out so I'm thinking they are the 15mm offset
But here's a link to them
http://www.kmcwheels.com/wheels/KM67...50%204WD%20FX4
Thanks everyone
But here's a link to them
http://www.kmcwheels.com/wheels/KM67...50%204WD%20FX4
Thanks everyone
#2
Mark
iTrader: (1)
depends if the wheels are +15 or -15 offset and what the backspaceing is...35/12.50/20 are 13.5+ wide... 295/65 are 35" tall and 12" wide...I would go with them.
#3
If they are both positive offest then the 35mm will be further in the wheel well and the 15mm will stick out a little bit more. You would want close to stock offset if your Going to run the 35/12.50, which is +44 if u had the 18s.
#5
Mark
iTrader: (1)
My Trail Grappler's are 295/65/20 and actual size is 35/12 on a 9" wheel...you gotta remember the tire will measure different on different size wheels..
#7
Senior Member
At the risk of asking a question that I'm sure has been covered elsewhere (but I don't have time to search thru a gazillion threads), what is the largest tire size that I can fit on a stock FX4 w/ the stock 20" wheels? TIA!
Trending Topics
#8
Mark
iTrader: (1)
#9
Ok I found out my rims are 35mm offset with 6.13 backset I would prefer to run the 35x12.50R20 if I could cause I think it would look better with my lift when I do it but I would run the 295/65R20 if I had to