VEECON

im trying to decide on the right wheel/tire set up for my truck. if i level it 2" or even 2.5"/3" rear block, would a 20x10 -12 (5bs) or 5.5bs wheel fit with 33" trail grapplers or an all terrain like hankook dynapro atm? my original plan was 20x9 0 offset but i like wheels with a deep lip, so im wondering if this would work. ive seen that 20x9 -12 (4.5bs) is tough to fit but was wondering even though 20x10 is wider, if the higher bs would help fit? the wheels im looking at in this size are the diamo 17 karat. appreciate the help.

vfuentes

Here is the answer: yes with 2.5 level
And here is the prove.
Diamo karat 20x10 back space of 5, offset -12
tires : nitto terragrappler 305/55r20 load range E

Hookem

You got anymore pics of that ranch hand??

vfuentes

VEECON

nice set up!!! do you think they would still fit with oem front bumper?

Rok

4x2 or 4x4 Veecon? Also look in the wheel tire thread thats stickied if you havent for 4x2 and 4x4 setups.

vfuentes

Yes, they will stay fit.
Actually we were thinking that may not fit because the aftermarket bumper.
But where you need to put attention with this wide set up is in the back of the front tire, when turning to the inside.
So far it has been working fine for me, with no issues. Now, i have not going off-road yet or some weird articulation in the suspension.

VEECON

any pics of what kind of trimming was needed?

vfuentes

i don’t have any pic for now. i will try to take a pic today.
But believe me there is not major trim. It is very minor trim at the bottom part of the gray/plastic fender.

Boatman_FX4

I had so much trouble deciding on offset when i got mine i thought i would post em up on some forums. Here ya go on my 14' SCREW 20x10 -12 offset Fuel Couplers on 33X12.50 Toyo Open Country M/T's! 2in Pro Comp Level


Yes they did rub and i trimmed plastic only no bumper trimming and it wasn't major may about 2in front and 1in in back.