Masi1926

A few weeks ago we were talking about the high beam switch and discovered that midway through the 14 production model (mine is a 14) they went back to the style of push forward for high beams and pull back was flash only.
Unlike mine which is pull back for high beams and flash.

If you have it, then you know it's a fine line between flashing someone and turning the high beams on.

If I search long enough, I'm sure I can figure out the part number for the 2014 push forward switch number.
So I'm reaching out to you guys to see if anyone knows that part number?
I can't imagine it would take anything more than just swapping out the whole stalk.
I don't have rain sensing wipers. Just normal blinkers w/wipers (courtesy wipe) and washer.
Has the 3 blinks for moving over, if that matters.
Thanks in advance for any help!

paintballdude05

Might these be the two switches?

2011-2013
http://www.tascaparts.com/ford/f-150...e=combo-switch

2014+
http://www.tascaparts.com/ford/f-150...&recommended=1

Masi1926

It's hard to tell... I wish they would describe the features a little better... Especially, now that I know it was a mid production change during the 14's run.
I came across one on eBay that said 12-15...? Idk about that..
Once I saw how cheap the stalk/switches are I thought it would be a really cheap, easy fix that's been driving me nuts for 3 years.

1stTruckGuy

I don't know if the plug inside the column is the same or not, but the 09-10 trucks had the push forward for high beam stalk and it looks identical to the one my 12 Lariat had. However it also stays up or down when blinker is on which I rather prefer anyway. Would he interesting if it would be a plug and play change-up.

Gitt24_84

Wow fascinating information. I had no idea the late 14's had this. I have in my possession a brand new SW-7032 (EL3Z-13K359-BA) that I bought to replace the broken once from my original power telescoping column. Only to find out the column is busted. I bought a new column from a '13 and yes it has the crappy activation, whereas this brand new switch has a push forward! Now, this one has the auto for the rain sensors but it'll work the same regardless. I'm to lazy to swap to this one, so it's just sitting here. I'll send it to you for 35 shipped. If you get it in and it doesn't work I'll refund you.

alborn98

I'll chime in. I have a 2014 FX4. Just replaced mine a couple months ago because I had the dreaded "wipers won't shut off" issue. I can confirm that my replacement has the push forward for brights pull for flash.

I ordered from RockAuto and it was Motorcraft Part SW7016. Alternate part number is EC3Z13K359AA. Here's the direct link. $28.79

https://www.rockauto.com/en/moreinfo...234&cc=3305852

Hope this helps.

Masi1926

I sincerely appreciate the offer. I would do it in a second, but my dealer has it too for the same price.
Seeing as I'm impatient, I'm gonna grab it tomorrow.
Again man, I appreciate the knowledge and the great offer. Thank you!

Masi1926

Thanks a lot too. Helped big time!
Thanks again!

Keith460

iTrader: (1)

That was discussed on this thread as well and there is a difference of one letter change in the part # from a C to an L.

Here: https://www.f150forum.com/f38/drove-...3/#post5078125

Gitt24_84

Note, there may be a programming difference with the SCCM module on these. I'm noticing my truck the high beams won't stay latched on when called. But it's probably more due to my Frankenstein truck