don59

As I was entering the highway doing about 70 or 80 km/he I floored the truck to enter the highway. As I did this the truck started shaking and vibrating real bad with no power at all. The check engine light started to flash. It did that 1 more time and then everything cleared up with no other issues after that. Any ideas what would cause this and would the code be stored in the computer even if it was on only briefly. Ant help is appreciated

DBL Boost

O2 sensor most likely is what blinks the check engine light

screamineagle

Scan for stored codes, if the CEL flashed it's possible there will be a code.

don59

Don't have a scanner but I'll take it into the dealer to check for me. Thanks for the quick responses

bcampbe7

Was it raining or moisture in the air?

There are TSBs that cover this issue. My guess is Cylinder 6 (or that bank) misfires.

don59

No. No rain as its minus 20 C

obusnizzle

None of the speculation matters. no scan, no answer.

71_340

Why even bother to ask? You have a new truck which is under warranty! As far as the TSBs are concerned.....those are for the older EB powered trucks.


Don't work yourself up and take it to the dealer.

don59

I think that is what I said I would do. I was just asking if the code would be in the computer and what might have caused the issue. No one is getting worked up, just trying to get info

don59

why even ask because that is what I thought this forum was for,guess I'm mistaken