2013 FX4: Work in Progress
#241
Senior Member
Thread Starter
NFAB Steps
The steps are positioned correctly and there is a third bracket positioned at the front edge of the bed.
Attached is a picture with all three in place, mounted in the highest position.
Northlight
Attached is a picture with all three in place, mounted in the highest position.
Northlight
The following users liked this post:
Northlight (05-11-2014)
#243
Northlight, can you post a pic of the RCI plate with just a front view of the truck? They state it adds extra protection for the intercooler so Im just curious to see how that looks.
Thanks
Wes
Thanks
Wes
The following users liked this post:
dirtyfergie (10-10-2013)
#247
Senior Member
Fantastic build. Subbed.
Raptor wheel is coming up for me
Question though; I contacted Tasca awhile ago for the PN for the wheel. They told me BL3Z3600BB. You have BL3Z3600CB. The image attached (BB top one, CB lower) shows that BB is with Sync and CB is without. On top of that for some reason CB without Sync is more expensive. Do all your buttons and functions work properly? If so what the hell is the explanation for this?
Raptor wheel is coming up for me
Question though; I contacted Tasca awhile ago for the PN for the wheel. They told me BL3Z3600BB. You have BL3Z3600CB. The image attached (BB top one, CB lower) shows that BB is with Sync and CB is without. On top of that for some reason CB without Sync is more expensive. Do all your buttons and functions work properly? If so what the hell is the explanation for this?
Last edited by RRSport; 05-01-2014 at 10:42 PM.