2013-14 fx4 leveling and tire size
#1
Junior Member
Thread Starter
2013-14 fx4 leveling and tire size
OK so I recently bought my dream truck I trade it my 2010 king ranch for a 2013 Fx4 with the 6.2L race red tremor package fully loaded I'm super stoked and I just ordered a 2.5 leveling (rough country) I've done a lot of research and I can't find a straight thread on what size tires I can put in it after leveling it. All the threads turn into some other year or models trucks and have about 400+ pages that takes toooooo long to go through.
Is there some fellers out there that done this and can tell me what tires size work? I plan on keeping the factory 20" wheels on..
Is there some fellers out there that done this and can tell me what tires size work? I plan on keeping the factory 20" wheels on..
#2
Senior Member
295 60 20 or 285 65 20 are really nice sizes for a leveled fx4 on the 20 inch wheels. Much wider/taller and you are going to run into some pretty good rubbing I would imagine. Here's mine with 1.5 inch level 285 65 20.
The following users liked this post:
yanki01 (12-23-2015)
#3
Junior Member
Thread Starter
So even with the 2.5 leveling the 35s will rub? Do you have the rubbing problem?
#4
Senior Member
Thanks. Mine haven't rubbed at all, but they are mighty close. I had a hard time getting a shop to mount them because they all thought they wouldn't fit. But they do, perfectly. If they were much wider I think it would hit the front valance. Having a little larger level may allow you to go a tad bigger.
The following users liked this post:
Bvalles (11-22-2015)
#5
Junior Member
Join Date: Mar 2015
Location: Cantonment FL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2012 F150 Silver FX4 with Factory 20's on NITTO Trail Grap M/T 35x12.5x20, RC 2.5" lift in front. Little rubbing in full lock in both directions. Rubs against front bottom trim backing up full lock to the left.