Topic Sponsor
2009 - 2014 Ford F150 General discussion on 2009 - 2014 Ford F150 truck.
Sponsored by:
Sponsored by:

2012 cab corner rust

Thread Tools
 
Search this Thread
 
Old Jan 12, 2017 | 05:50 PM
  #21  
ADAMH2012's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2015
Posts: 21
Likes: 0
Default

I am located in Iowa, and yes all maintinence done at the dealer I purchased it from.
Reply
Old Jan 12, 2017 | 05:54 PM
  #22  
kobi2013's Avatar
Junior Member
 
Joined: Jul 2015
Posts: 17
Likes: 1
From: St Louis
Default

You bought it New? How many miles?
Reply
Old Jan 12, 2017 | 05:58 PM
  #23  
ADAMH2012's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2015
Posts: 21
Likes: 0
Default

Originally Posted by kobi2013
You bought it New? How many miles?
yes I bought it new. Has 70k on it
Reply
Old Jan 12, 2017 | 06:12 PM
  #24  
who_knos's Avatar
Senior Member
 
Joined: Jan 2017
Posts: 403
Likes: 39
From: Iowa
Default

Hello just joined today and also from Iowa. I just recently bought a 2013 screw eco and had it on the hoist last night and if you feel in the rocker holes and frame holes there may be all kinds of dirt in there, my rockers and frame is full of dirt and I spent 2+ hours with air blowing it out and I bet ended up with 30lbs or better on the ground so maybe check all the holes see what you find. Plus there is much more in the frame yet.
Reply
Old Jan 12, 2017 | 06:13 PM
  #25  
ADAMH2012's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2015
Posts: 21
Likes: 0
Default

Originally Posted by who_knos
Hello just joined today and also from Iowa. I just recently bought a 2013 screw eco and had it on the hoist last night and if you feel in the rocker holes and frame holes there may be all kinds of dirt in there, my rockers and frame is full of dirt and I spent 2+ hours with air blowing it out and I bet ended up with 30lbs or better on the ground so maybe check all the holes see what you find. Sorry for the book
thanks for the input!
Reply
Old Jan 12, 2017 | 06:18 PM
  #26  
Doorguy1's Avatar
Junior Member
 
Joined: Jan 2017
Posts: 1
Likes: 0
From: Leamington, Ontario
Default

I have a 2009 platinum that needs the cab corners repaired. Any idea how much this will cost?
Reply
Old Jan 12, 2017 | 06:20 PM
  #27  
ADAMH2012's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2015
Posts: 21
Likes: 0
Default

I didn't even get an estimate yet, I have a feeling it is going to be quite expensive though!
Reply
Old Jan 12, 2017 | 06:20 PM
  #28  
who_knos's Avatar
Senior Member
 
Joined: Jan 2017
Posts: 403
Likes: 39
From: Iowa
Default

Your welcome and mine must of been a farm or gravel travel rig cuz the skid plates front and fuel tank was full as well.
Reply
Old Jan 12, 2017 | 06:23 PM
  #29  
kobi2013's Avatar
Junior Member
 
Joined: Jul 2015
Posts: 17
Likes: 1
From: St Louis
Default

I assume you were talking about your warranty start date of 1-12-2012. Did you have the dealer document the rust on a repair order?
Reply
Old Jan 12, 2017 | 06:26 PM
  #30  
ADAMH2012's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2015
Posts: 21
Likes: 0
Default

Not sure on the warranty start date, the truck build date was 1-12. The dealer took a ton of pics and even put on the RO that it looked like perforated rust damage so hopefully the rep will see that also and cover it.
Reply



All times are GMT -4. The time now is 08:24 PM.