2011 Screw backseat latch broke
#1
Junior Member
Thread Starter
2011 Screw backseat latch broke
I was working on looking at the latch for the back seat, and when I went to let the back seat down, my handle snapped. (see pic). It won't let the seat down anymore, but I can reach down at the bottom hinge and push, and it will still let me put the seat down, so I can deal with it. I think the lever just pulls the hinge with a wire that goes there anyway.
Is there a way to take it apart and glue it? I don't see the screws. Or do I need to take it to the $dealer?
Is there a way to take it apart and glue it? I don't see the screws. Or do I need to take it to the $dealer?
#2
Senior Member
just go buy a new latch and install it yourself? glue isnt going to work very long.
The trim piece prolly just pops off with a screw driver or something but I havent looked for sure
The trim piece prolly just pops off with a screw driver or something but I havent looked for sure
#5
Junior Member
Thread Starter
I think I will wait for my next service appointment and see if its covered. If not I will ask how much and see the cost difference to replace it my self or have the dealer do it.
It seems defective to me. I did not really pull it hard when it broke.
It seems defective to me. I did not really pull it hard when it broke.
Trending Topics
#8
Senior Member
iTrader: (1)
My latch just like the OP broke yesterday. Seems for something to need to pull that wire shouldn't be made out of plastic. Brought it to dealer and they are replacing it under warranty.
But this is going to break again, no doubt. What is the part number so I will know what it is going to cost me when out of warranty?
Also, the OP mentioned that he can manually get around this but where? I asked the dealer and they said the only way is via the latch that broke and I need to wait until the replacement comes in. Come on....
But this is going to break again, no doubt. What is the part number so I will know what it is going to cost me when out of warranty?
Also, the OP mentioned that he can manually get around this but where? I asked the dealer and they said the only way is via the latch that broke and I need to wait until the replacement comes in. Come on....