2011 Lariat w/MH1 Projector Retrofit
04-04-2012, 10:40 AM
#21
F150 Forum
Originally Posted by bilinvic
Whether these components are from China or Japan, it doesn't matter...They are proven and backed by an American Company, The Retrofit Source...a highly respected developer and supplier of high performance lighting.
You actually think every component on the F150 is American made????
You actually think every component on the F150 is American made????
04-04-2012, 11:24 AM
#22
F150 Forum
I see retrofit source also sells hella too. Like that, have you ever heard of philips 85123 bulbs? Awesome light output very bright with the hints of blues and purples. Had a set in my Jetta before I traded it. Problem is they don't make them anymore so people don't know about them.
04-15-2012, 01:27 AM
#27
Platinum Member!
Thread Starter
04-16-2012, 01:56 AM
#29
wait. what?
those look awesome!
is the MH1 a direct bolt-in/no cutting projector for this application? I did a MH1 retro in my 2011 Civic Si with 9006's and was able to knock the whole thing out in about 4 hours since I didn't have to trim a single thing.
and one more question, does it seem like your friend's truck puts out any glare since the reflector bowl wasn't painted?
is the MH1 a direct bolt-in/no cutting projector for this application? I did a MH1 retro in my 2011 Civic Si with 9006's and was able to knock the whole thing out in about 4 hours since I didn't have to trim a single thing.
and one more question, does it seem like your friend's truck puts out any glare since the reflector bowl wasn't painted?
04-16-2012, 02:04 AM
#30
Platinum Member!
Thread Starter
Thanxs very much.
The MH1 requires grinding as well. Not nearly like the FX-R, but enough for the projector to be seated properly in order to get the large nut on the back tightened up enough to still be able to put the bulb retainer on.
No glare at all, subtle glow maybe!!!!
The MH1 requires grinding as well. Not nearly like the FX-R, but enough for the projector to be seated properly in order to get the large nut on the back tightened up enough to still be able to put the bulb retainer on.
No glare at all, subtle glow maybe!!!!