2010 STX mirror swap write up. With heated mirrors!!!
#121
Junior Member
Join Date: Apr 2017
Location: Marshfield, WI
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
2013 xlt
The only wire that was there was the 4 for the mirror direction, turn signal, and puddle lamp (and ground), no heat. The original mirror only had mirror direction, nothing else. Which brings me back to my original question. outside of tracing each wire in the climate control, which is what it sounds like I'm doing, can anyone give me any quick info ("Blue w/purple wire located 3" behind console on left). I assume I'm doing to same and wiring all this manually, but would like to use as much factory as possible, knowing there maybe nothing factory that even the pin is missing (same as mirror) that will make that impossible. But again, not sure where to start, if it's worth me getting this updated climate control or wiring a separate switch like the power fold provided.
The following users liked this post:
mobie (06-04-2018)
#123
Junior Member
Join Date: Apr 2017
Location: Marshfield, WI
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
2013 xlt
If I was mistaken, I'll be ecstatic, but as I did my initial multi-tester on the harness, top row was yellow/Brown was blinker, purple was Puddle, bottom row the black/yellow was ground, and 4 adjoined was mirror direction.
Hope that helps. Maybe Purple is heat, but didn't make sense to have power to it when I don't have the climate control for it. I couldn't close the door when I had this apart to see if power went away, but figured that was puddle.
Hope that helps. Maybe Purple is heat, but didn't make sense to have power to it when I don't have the climate control for it. I couldn't close the door when I had this apart to see if power went away, but figured that was puddle.
#125
Senior Member
Have had a busted up drivers side mirror from being hit by someone and i busted up my passenger side when parking. Perfect excuse to get heated mirrors now. Im hoping I can get the climate control with the heated mirror button and all will work without issues. 2014 STX.
The following users liked this post:
mobie (06-04-2018)
#126
well, I just got the climate controller today and installed , so everything is working perfect except the button would not lid up when pushed but the mirrors will definitely heat up , and thats because I dont have an defroster rear window , only a regular one, thats why the button would not lid up, Also does somebody knows if I install a defrost rear window I need to pull the wires and harness or they are there ready to be plugged in to the window?
#128
Senior Member
My 2014 STX had nothing but powered glass. I swapped in the ebay fully powered everything and so far everything has worked for 2 years. I have no idea if the heated glass works as I never put in the hvac controller with it. Never had signals or puddle lights and they work.
#129
I just swapped in some takeoff Ford mirrors with signals and heat to my 2014 STX. Also added Ruxifey sequential turn signals from Amazon to both front and back of the mirrors and they work great. Waiting for delivery of an ebay HVAC control to activate mirror heat.
#130
If by powered glass you mean you could adjust the mirror from your door, that’s not quite the same. The wiring harness would have to be in place for that. I don’t even have that, I have the 100% manual mirrors. So I was hoping to find out if the harness might be there without tearing everything apart to look. It’s good to know though that if it is there the rest of the stuff should work.